Plate Locations and Film Locations
Products such as earthmoving equipment that are not designed for an operator to ride are identified by Serial Numbers. Also, most major attachments are identified by Serial Numbers.
For quick reference, record the identification number in the space below the illustration.
Show/hide table
Illustration 1 | g01313409 |
Right side view |
This is the Serial Number Plate. The plate is located on the outside of the right hand mainframe.
Serial Number Plate ____________________
Caterpillar Information System:
AS2302 Vers-A-Mat Asphalt Screed Specifications
24M Motor Grader Machine Systems Circle
24M Motor Grader Power Train Output Transfer Gear and Case
587R Pipelayer Power Train Troubleshooting
M325D L MH and M325D MH Material Handlers Hydraulic System Relief Valve (Pilot) - Test and Adjust
R1700G Load Haul Dump Power Train Axle Shaft - Install
2006/02/13 Barrel Adapter Allows Technician to Attach Filter Unit to Barrel {0645, 0680}
R1700G Load Haul Dump C11 Engine Supplement Hood - Remove
R1700G Load Haul Dump Machine Systems Ejector Bucket - Assemble
R1700G Load Haul Dump Machine Systems Ejector Bucket - Disassemble
RM-300 Reclaimer Mixer Machine Systems Rotor Stub Shaft - Disassemble
R1700G Load Haul Dump C11 Engine Supplement Exhaust Purifier and Muffler - Install
C15 and C18 Generator Set Engines Front Cover - Remove
C15 and C18 Generator Set Engines Front Cover - Install
C15 and C18 Generator Set Engines Gear Group (Front) - Remove
583T Pipelayer Power Train Final Drive - Remove - Right and Left Side
TH350B, TH360B, TH460B and TH560B Telehandlers Machine Systems Piston Pump (Implement and Steering)
TH350B, TH360B, TH460B and TH560B Telehandlers Machine Systems Piston Pump (Implement and Steering)
587R Pipelayer Hydraulic System Piston Pump (Implement)
587R Pipelayer Cooling System Coolant Extender (ELC) - Add
Clarification of Vertical Method Configuration in GPS/ATS AccuGrade TM Version 6.0 Software Operation for Motor Graders {7220} Clarification of Vertical Method Configuration in GPS/ATS AccuGrade TM Version 6.0 Software Operation for Motor Graders {7220}
M325D and M330D Excavators Power Train Electronic Control System MID 027 - CID 0298 - FMI 03
24M Motor Grader Power Train Torque Converter
583T Pipelayer Power Train Final Drive - Install - Right and Left Side