24M Motor Grader Machine Systems Caterpillar


Circle

Usage:

24M B93



图 1g01239305

侧视图




图 2g01355765

截面 A-A

(1) 138-7436 垫片组

数量 ... 2
一个垫片组的厚度 ... 3.90 ± 0.8 mm (0.154 ± 0.032 in)
垫片数量 ... 26
0.5 mm (0.020 in) 垫片的数量 ... 14
0.16 mm (0.006 in) 垫片的数量 ... 10
0.8 mm (0.032 in) 垫片的数量 ... 2

注: 垫片组必须平整且没有凹痕或皱褶。

(2) 四个螺栓的扭矩为 360 ± 60 N·m (270 ± 45 lb ft)。 使用交替顺序拧紧螺栓 (2) 。 达到正确扭矩后,螺栓 (2) 还需要再拧紧 120° ±10°。

Caterpillar Information System:

24M Motor Grader Power Train Output Transfer Gear and Case
587R Pipelayer Power Train Troubleshooting
M325D L MH and M325D MH Material Handlers Hydraulic System Relief Valve (Pilot) - Test and Adjust
R1700G Load Haul Dump Power Train Axle Shaft - Install
2006/02/13 Barrel Adapter Allows Technician to Attach Filter Unit to Barrel {0645, 0680}
R1700G Load Haul Dump C11 Engine Supplement Hood - Remove
R1700G Load Haul Dump Machine Systems Ejector Bucket - Assemble
R1700G Load Haul Dump Machine Systems Ejector Bucket - Disassemble
RM-300 Reclaimer Mixer Machine Systems Rotor Stub Shaft - Disassemble
R1700G Load Haul Dump C11 Engine Supplement Exhaust Purifier and Muffler - Install
572R Series 2, 583T, 587T, PL83 and PL87 Pipelayers Transmission - 583T PL83 587T And PL87
Clarification of Lift + Cross Slope Configuration in GPS/ATS AccuGrade TM Version 6.0 Software Operation for Motor Graders {7220} Clarification of Lift + Cross Slope Configuration in GPS/ATS AccuGrade TM Version 6.0 Software Operation for Motor Graders {7220}
AS2302 Vers-A-Mat Asphalt Screed Specifications
AS2302 Vers-A-Mat Asphalt Screed Plate Locations and Film Locations
C15 and C18 Generator Set Engines Front Cover - Remove
C15 and C18 Generator Set Engines Front Cover - Install
C15 and C18 Generator Set Engines Gear Group (Front) - Remove
583T Pipelayer Power Train Final Drive - Remove - Right and Left Side
TH350B, TH360B, TH460B and TH560B Telehandlers Machine Systems Piston Pump (Implement and Steering)
TH350B, TH360B, TH460B and TH560B Telehandlers Machine Systems Piston Pump (Implement and Steering)
587R Pipelayer Hydraulic System Piston Pump (Implement)
587R Pipelayer Cooling System Coolant Extender (ELC) - Add
Clarification of Vertical Method Configuration in GPS/ATS AccuGrade TM Version 6.0 Software Operation for Motor Graders {7220} Clarification of Vertical Method Configuration in GPS/ATS AccuGrade TM Version 6.0 Software Operation for Motor Graders {7220}
M325D and M330D Excavators Power Train Electronic Control System MID 027 - CID 0298 - FMI 03
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.