Boom Sheave Block (Lower) - Disassemble
Disassembly Procedure
Start By:
- Remove the lower boom sheave block. Refer to Disassembly and Assembly, "Boom Sheave Block (Lower) - Remove".
- Remove bolt (1) and retainer (2) .
Show/hide table
Illustration 1 | g01232079 |
- Remove pin assembly (4) , sheave assembly (5) , spacer (6) (not shown), and sheave assembly (7) from housing (3) .
Show/hide table
Illustration 2 | g01232098 |
- Remove washer (8) and remove sheave assembly (5) .
Show/hide table
Illustration 3 | g01232122 |
- Remove washer (8) and spacer (6) from sheave assembly (7) .
Show/hide table
Illustration 4 | g01369352 |
- Remove remaining washers (9) from sheave assembly (7) .
Show/hide table
Illustration 5 | g01369353 |
Caterpillar Information System:
R1700G Load Haul Dump Additional Messages
R1700G Load Haul Dump Plate Locations and Film Locations
R1700G Load Haul Dump Power Train STIC Lockout Control
R1700G Load Haul Dump Power Train Transmission Support
PM-201 Cold Planer Machine Systems Location of Components (Steering System)
PM-201 Cold Planer Machine Systems Operator Controls (Steering System)
PM-201 Cold Planer Machine Systems Steering System
AccuGrade® GPS Using The CD550A Display (GPS/ATS/Sonic/Cross Slope) Operator Access
541, 551 and 552 Track Feller Bunchers Specifications
541, 551 and 552 Track Feller Bunchers Adjustable Gage Undercarriage Frame
2006/02/13 New Software Is Now Used For The Fuel/Oil Sensor {7620}
587R Pipelayer Machine Systems Case and Frame
2006/01/02 New Guidelines for Inspecting Pistons {1214}
PM-201 Cold Planer Machine Systems Electrical Schematic (Steering System)
Shop Repair Procedure for Positive Pin Retention Track {4169, 4170, 4171, 4174, 4175} Shop Repair Procedure for Positive Pin Retention Track {4169, 4170, 4171, 4174, 4175}
PM-201 Cold Planer Machine Systems Hydraulic Schematic (Steering System)
C6.6 Engines for Caterpillar Built Machines Engine Oil Cooler
416E Backhoe Loader Hydraulic and Steering System Control Valve (Auxiliary)(Loader)
583T Pipelayer Machine Systems Hook Winch Motor - Remove
583T Pipelayer Machine Systems Hook Winch Motor - Install
416E Backhoe Loader Hydraulic and Steering System Control Valve (Extendable Stick)
587R Pipelayer Machine Systems Hook Winch Motor - Disassemble
New Grease Lines for Stick and Boom{7510} New Grease Lines for Stick and Boom{7510}
587R Pipelayer Machine Systems Hook Winch Motor - Assemble