Specifications
Show/hide table
 | |
| Illustration 1 | g01167690 |
Typical Example | |
Show/hide table
 | |
| Illustration 2 | g01167692 |
Note: The dimensions will vary depending on the attached work tool.
Note: The dimensions will vary depending on the type of the machine (tilt or no tilt).
Show/hide table
| Shipping Dimensions | |||
| Weights and Measures | 541 Track Feller Buncher | 551 Track Feller Buncher | 552 Track Feller Buncher (tilting undercarriage) |
| Approximate Weight | 29211 kg (64400 lb) |
30980 kg (68300 lb) |
34382 kg (75800 lb) |
| Overall Length (A) | 9842 mm (387 inches) |
9842 mm (387 inches) |
9675 mm (381 inches) |
| Overall Height (B) | 4808 mm (189 inches) |
4808 mm (189 inches) |
4969 mm (196 inches) |
| Width of Tracks (C) | 3494 mm (138 inches) |
3494 mm (138 inches) |
3494 mm (138 inches) |
| Width of Upper Structure (D) | 3391 mm (134 inches) |
3391 mm (134 inches) |
3391 mm (134 inches) |
| Height of Cab (E) | 3396 mm (134 inches) |
3793 mm (149 inches) |
3869 mm (152 inches) |
| Ground Clearance | 872 mm (34.3 inches) |
872 mm (34.3 inches) |
872 mm (34.3 inches) |
Note: Dimensions for 541 and 551 use 610 mm (24 inches) track shoes. Dimensions for 552 use 711 mm (28 inches) track shoes.
Caterpillar Information System:
541, 551 and 552 Track Feller Bunchers Adjustable Gage Undercarriage Frame
2006/02/13 New Software Is Now Used For The Fuel/Oil Sensor {7620}
587R Pipelayer Machine Systems Case and Frame
M315D2 and M317D2 Wheeled Excavators Boom, Stick and Bucket Operation
Updates Have Been Made to the Propel Control System on Certain Asphalt Compactors {5910} Updates Have Been Made to the Propel Control System on Certain Asphalt Compactors {5910}
PM-201 Cold Planer Machine Systems Location of Components (Auxiliary Hydraulic System)
583T Pipelayer Machine Systems Load Sheave Block (Lower) - Assemble
587R Pipelayer Machine Systems Drawbar
416E Backhoe Loader Hydraulic and Steering System Control Valve (Stabilizer)
587R Pipelayer Machine Systems Muffler
2006/01/02 New Filter Switch For 3500B Fuel Filter Application {1261, 1435}
PM-201 Cold Planer Machine Systems Operator Controls (Auxiliary Hydraulic System)
AccuGrade® GPS Using The CD550A Display (GPS/ATS/Sonic/Cross Slope) Operator Access
PM-201 Cold Planer Machine Systems Steering System
PM-201 Cold Planer Machine Systems Operator Controls (Steering System)
PM-201 Cold Planer Machine Systems Location of Components (Steering System)
R1700G Load Haul Dump Power Train Transmission Support
R1700G Load Haul Dump Power Train STIC Lockout Control
R1700G Load Haul Dump Plate Locations and Film Locations
R1700G Load Haul Dump Additional Messages
587R Pipelayer Machine Systems Boom Sheave Block (Lower) - Disassemble
2006/01/02 New Guidelines for Inspecting Pistons {1214}
PM-201 Cold Planer Machine Systems Electrical Schematic (Steering System)
Shop Repair Procedure for Positive Pin Retention Track {4169, 4170, 4171, 4174, 4175} Shop Repair Procedure for Positive Pin Retention Track {4169, 4170, 4171, 4174, 4175}