Hook Winch Motor - Remove
Removal Procedure
Start By:
- Remove the boom winch motor. Refer to Disassembly and Assembly, "Boom Winch Motor - Remove".
- Disconnect hose assembly (1), hose assembly (2), hose assembly (3), hose assembly (4), hose assembly (5), and hose assembly (6).
Show/hide table
Illustration 1 | g01232361 |
- Disconnect hose assembly (7) .
Show/hide table
Illustration 2 | g01232363 |
- Attach a suitable lifting device to hook winch motor (9) .
Show/hide table
Illustration 3 | g01232365 |
- Remove bolts (8) and hook winch motor (9). The weight of hook winch motor (9) is approximately 34 kg (75 lb).
Caterpillar Information System:
416E Backhoe Loader Hydraulic and Steering System Control Valve (Auxiliary)(Loader)
C6.6 Engines for Caterpillar Built Machines Engine Oil Cooler
PM-201 Cold Planer Machine Systems Hydraulic Schematic (Steering System)
Shop Repair Procedure for Positive Pin Retention Track {4169, 4170, 4171, 4174, 4175} Shop Repair Procedure for Positive Pin Retention Track {4169, 4170, 4171, 4174, 4175}
PM-201 Cold Planer Machine Systems Electrical Schematic (Steering System)
2006/01/02 New Guidelines for Inspecting Pistons {1214}
587R Pipelayer Machine Systems Boom Sheave Block (Lower) - Disassemble
R1700G Load Haul Dump Additional Messages
R1700G Load Haul Dump Plate Locations and Film Locations
R1700G Load Haul Dump Power Train STIC Lockout Control
R1700G Load Haul Dump Power Train Transmission Support
PM-201 Cold Planer Machine Systems Location of Components (Steering System)
583T Pipelayer Machine Systems Hook Winch Motor - Install
416E Backhoe Loader Hydraulic and Steering System Control Valve (Extendable Stick)
587R Pipelayer Machine Systems Hook Winch Motor - Disassemble
New Grease Lines for Stick and Boom{7510} New Grease Lines for Stick and Boom{7510}
587R Pipelayer Machine Systems Hook Winch Motor - Assemble
416E Backhoe Loader Hydraulic and Steering System Control Valve (Auxiliary)
PM-201 Cold Planer Machine Systems Water Spray System
416E Backhoe Loader Hydraulic and Steering System Control Valve (Stick)
416E Backhoe Loader Hydraulic and Steering System Control Valve (Bucket)
PM-201 Cold Planer Machine Systems Location of Components (Water Spray System)
330D and 336D Excavators Machine System Specifications Swing Gear and Bearing
587R Pipelayer Machine Systems Boom Sheave Block (Lower) - Assemble