Piston Motor (Drum Propel) - Disassemble
Disassembly Procedure
Show/hide table
Required Tools     | |||
---|---|---|---|
Tool     | Part Number     | Part Description     | Qty     |
A     | 4C-5660     | Adapter     | 1     |
1P-0074 | Puller     | 1     | |
B     | 1H-3110     | Bearing Puller Gp     | 1     |
Start By:
- Remove the piston motor. Refer to Disassembly and Assembly, "Piston Motor (Drum Propel) - Remove".
- Remove bolts (1) and cover (2) .
Show/hide table
Illustration 1 | g01181425 |
- Remove bevel washer (3) .
Show/hide table
Illustration 2 | g01181429 |
- Remove gasket (4) .
Show/hide table
Illustration 3 | g01181426 |
- Use Tooling (A) in order to remove piston (5) .
- Remove ring (6) .
Show/hide table
Illustration 4 | g01181427 |
- Remove seal (9), plates (10), plates (12), bolts (8), and housing (11) .
Show/hide table
Illustration 5 | g01181428 |
- Remove plug (13), O-ring seals (14), bolts (15), and housing (16) .
Show/hide table
Illustration 6 | g01181430 |
- Remove O-ring seal (17) .
Show/hide table
Illustration 7 | g01181431 |
- Remove shaft (19), housing (18), and cylinder (20) .
Show/hide table
Illustration 8 | g01181432 |
- Remove keepers (21) and O-ring seal (22) .
Show/hide table
Illustration 9 | g01181433 |
- Remove shim (23) .
Show/hide table
Illustration 10 | g01181435 |
- Use Tooling (B) and a suitable press in order to remove shaft (25) from housing (24) .
Show/hide table
Illustration 11 | g01181436 |
- Remove bearing cone (26) .
Show/hide table
Illustration 12 | g01181438 |
- Remove bearing cup (27) .
Show/hide table
Illustration 13 | g01181440 |
- Repeat Step 14 for the opposite side.
- Remove Duo-Cone seal (28) and bearing cone (29) .
Show/hide table
Illustration 14 | g01181442 |
Caterpillar Information System:
793C Off-Highway Truck Automatic Lubrication Reservoir - Fill
AP-800D and BG-230D Asphalt Pavers Lubricant Viscosities
2006/01/02 Improvements to the Output Transfer Gear {3159}
RM-300 Reclaimer Mixer Machine Systems Gear Pump (Transmission) Flow - Test - Rotor Differential
2006/01/02 Improvements to the Output Transfer Gear {3159}
966H Wheel Loader and 972H Wheel Loader Power Train Modulating Valve (Transmission Clutch)
IT62H Integrated Toolcarrier and 950H and 962H Wheel Loaders Power Train Oscillating Axle (Rear) - Install
TH350B, TH360B, TH460B and TH560B Telehandlers Hydraulic System Lowering Control Pump (Electric) - If Equipped
IT62H Integrated Toolcarrier and 950H and 962H Wheel Loaders Power Train Oscillating Axle (Rear) - Remove
RM-300 Reclaimer Mixer Machine Systems Sequence Valve - Test and Adjust
420E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Hydraulic Oil Sample - Obtain
2005/07/25 Correction to Systems Operation Testing and Adjusting, "Axle Oil Cooler" {1365, 1408}
CB-434D and CB-434D XW Vibratory Compactor Machine Systems Piston Motor (Drum Propel) - Assemble
789C Off-Highway Truck Fuel System Priming Filter - Replace - If Equipped
789C Off-Highway Truck Oil Filter (Torque Converter) - Replace
2005/07/04 An Improved Hoist Control Valve Is Available {5051, 5136}
RM-300 Reclaimer Mixer Machine Systems Wheel Alignment (Front) - Check and Adjust
RM-300 Reclaimer Mixer Machine Systems Hydraulic Accumulator (Rotor Transmission Shift Valve) - Test and Adjust
24H Motor Grader Braking System Valve (Service and Secondary Brake Control)
120H and 135H Motor Graders Hydraulic and Steering System Relief Valve (Scarifier)
C15 and C18 Tier 4 Final Engines Vibration Damper - Check
TK711, TK721, TK722 and TK732 Track Feller Bunchers Hydraulic System IQAN Error Messages and Warnings
C7.1 Engines for Caterpillar Built Machines Camshaft
RM-300 Reclaimer Mixer Machine Systems Rotor Clutch - Test and Adjust