2005/07/04 Caterpillar


An Improved Hoist Control Valve Is Available {5051, 5136}

Usage:

D350E II 2XW
Articulated Truck:
725 (S/N: AFX1-1178)
730 (S/N: AGF1-1091)
735 (S/N: AWR1-UP; B1N1-UP)
740 (S/N: AXM1-UP; B1P1-UP)
740 EJECTOR (S/N: AZZ1-UP; B1R1-UP)
D250ESeries II (S/N: 4PS1-UP)
D300ESeries II (S/N: 5KS1-UP)
D350ESeries II (S/N: 2XW1-UP)
D400ESeries II (S/N: 8PS1-UP)
D400ESeries II Ejector (S/N: APF1-UP)
Service Magazine SEPD0791, 4 July 2005, "An Improved Hoist Control Valve Is Available". Disregard this article. See the article that follows.

Description of Change: An improved hoist control valve is available for the listed machines.

The design of the stem in the hoist control valve has been improved. The redesigned stem improves the reliability and performance of the hoist control valve.

The redesigned stem reduces the possibility of wearing of the body for the hoist control valve. Wear of the body for the hoist control valve can cause leakage of oil within the hoist control valve. In some instances, leakage within the hoist control valve can cause oil pressure in the hydraulic system for lowering the body when the hoist control lever is in the FLOAT position. This condition can create a load on the hydraulic system for the hoist when the system is not required. The resultant load may cause the hydraulic oil to overheat.

Adaptable To: The hoist control valves that are listed in Table 1 have been improved. The stems in the hoist control valves have been redesigned.

The improved hoist control valves are effective with 735 (S/N: B1N186-UP), 740 (S/N: B1P231-UP) and 740 EJECTOR (S/N: B1R163-UP). The improved hoist control valves are direct replacements of the former versions of the hoist control valves in all earlier machines that are listed.

Table 1
Machine     Hoist Control Valve    
740 EJECTOR
(S/N: B1R1-UP)
(S/N: AZZ1-UP)    
207-0035 Control Valve    
740
(S/N: B1P1-UP)
(S/N: AXM1-UP)
735
(S/N: B1N1-UP)
(S/N: AWR1-UP)    
189-5772 Hoist Control Valve    
730
(S/N: AGF804-1091)
725
(S/N: AFX867-1178)    
214-0662 Hoist Control Valve    
730
(S/N: AGF1-803)
725
(S/N: AFX1-866)    
174-0018 Hoist Control Valve    
400 Series II Ejector
(S/N: APF274-UP)    
177-2193 Ejector Control Valve    
400 Series II Ejector
(S/N: APF1-273)    
174-0019 Hoist Control Valve    
400 Series II
(S/N: 8PS770-UP)
350 Series II
(S/N: 2XW373-UP)    
190-3481 Hoist Control Valve    
400 Series II
(S/N: 8PS598-769)
350 Series II
(S/N: 2XW282-372)    
174-0019 Hoist Control Valve    
400 Series II
(S/N: 8PS1-597)
350 Series II
(S/N: 2XW1-281)    
139-5823 Hoist Control Valve    
300 Series II
(S/N: 5KS444-UP)
250 Series II
(S/N: 4PS509-UP)    
174-0018 Hoist Control Valve    
300 Series II
(S/N: 5KS1-443)
250 Series II
(S/N: 4PS1-508)    
133-8900 Hoist Control Valve    

Caterpillar Information System:

789C Off-Highway Truck Oil Filter (Torque Converter) - Replace
789C Off-Highway Truck Fuel System Priming Filter - Replace - If Equipped
CB-434D and CB-434D XW Vibratory Compactor Machine Systems Piston Motor (Drum Propel) - Assemble
CB-434D and CB-434D XW Vibratory Compactor Machine Systems Piston Motor (Drum Propel) - Disassemble
793C Off-Highway Truck Automatic Lubrication Reservoir - Fill
AP-800D and BG-230D Asphalt Pavers Lubricant Viscosities
2006/01/02 Improvements to the Output Transfer Gear {3159}
RM-300 Reclaimer Mixer Machine Systems Gear Pump (Transmission) Flow - Test - Rotor Differential
2006/01/02 Improvements to the Output Transfer Gear {3159}
966H Wheel Loader and 972H Wheel Loader Power Train Modulating Valve (Transmission Clutch)
IT62H Integrated Toolcarrier and 950H and 962H Wheel Loaders Power Train Oscillating Axle (Rear) - Install
TH350B, TH360B, TH460B and TH560B Telehandlers Hydraulic System Lowering Control Pump (Electric) - If Equipped
RM-300 Reclaimer Mixer Machine Systems Wheel Alignment (Front) - Check and Adjust
RM-300 Reclaimer Mixer Machine Systems Hydraulic Accumulator (Rotor Transmission Shift Valve) - Test and Adjust
24H Motor Grader Braking System Valve (Service and Secondary Brake Control)
120H and 135H Motor Graders Hydraulic and Steering System Relief Valve (Scarifier)
C15 and C18 Tier 4 Final Engines Vibration Damper - Check
TK711, TK721, TK722 and TK732 Track Feller Bunchers Hydraulic System IQAN Error Messages and Warnings
C7.1 Engines for Caterpillar Built Machines Camshaft
RM-300 Reclaimer Mixer Machine Systems Rotor Clutch - Test and Adjust
C15 and C18 Petroleum Generator Sets Engine Performance - Test - Standby Generator Sets
C6.6 Engines for Caterpillar Built Machines Piston Cooling Jet
IT62H Integrated Toolcarrier and 950H and 962H Wheel Loaders Power Train Tire and Rim (Front) - Remove and Install
THP10 Series II and THP24S Series II Access Platform for Series B Telehandlers Rotary Actuator Mounting Bolts - Tighten
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.