Location of Electrical Components
Show/hide table
Illustration 1 | g02221559 |
The following electrical components are part of the material feed system:
- Electric displacement control valves on hydraulic pump (1) for the right drag conveyor and the right auger conveyor
- Electric displacement control valves on hydraulic pump (2) for the left drag conveyor and the right auger conveyor
- Circuit breakers, machine ECM, and operator station relays (3)
- Operator station selector switch (4)
- Left conveyor mode switch, right conveyor mode switch, left auger mode switch, right auger mode switch, and auger reverse switch on the left instrument panel (5)
- Left conveyor mode switch, right conveyor mode switch, left auger mode switch, right auger mode switch, and auger reverse switch on the right instrument panel (6)
- Left paddle sensor (7)
- Right paddle sensor (8)
Caterpillar Information System:
793D Off-Highway Truck Suction Screen (Rear Axle Lubrication) - Clean
AP-1055D and BG-2455D Asphalt Pavers Conveyor Systems Introduction
793D Off-Highway Truck/Tractor Relay Valve (Brake) - Install
793D Off-Highway Truck/Tractor Relay Valve (Brake) - Remove
793D Off-Highway Truck Engine Supplement Alternator - Remove and Install
785D OEM Off-Highway Truck Machine Systems Check Valve (Service Brake) - Remove and Install
IT62H Integrated Toolcarrier and 950H and 962H Wheel Loaders Machine Systems Secondary Steering Valve - Install
IT62H Integrated Toolcarrier and 950H and 962H Wheel Loaders Machine Systems Secondary Steering Valve - Remove
725 and 730 Articulated Trucks Machine Systems Steering Cylinder - Remove and Install
Instructions for Converting Intermittent Saw to Hot Saw{5050, 6327, 7000} Instructions for Converting Intermittent Saw to Hot Saw{5050, 6327, 7000}
PS-150B and PS-200B Paving Compactors Fuel System Water Separator - Drain
587R Pipelayer Fairlead Sheave - Lubricate
AP-1055D and BG-2455D Asphalt Pavers Conveyor Systems Location of Hydraulic Components
AP-1055D and BG-2455D Asphalt Pavers Conveyor Systems Conveyor System
C27 and C32 Engines for Caterpillar Built Machines Injector Solenoid Circuit - Test
PS-150B and PS-200B Paving Compactors Daily Inspection
587R Pipelayer Hook and Wire Cable - Inspect
C9 Engine for Caterpillar Built Machines Fuel Priming Pump - Remove and Install
AP-1055D and BG-2455D Asphalt Pavers Propel System Harness (Speed Potentiometer) and Electronic Sensor - Test
950H Wheel Loader, 962H Wheel Loader and IT62H Integrated Toolcarrier Braking and Hydraulic Fan System General Information (Brake, Hydraulic Fan System)
583T Pipelayer Hook Load Line - Install
AP-1055D and BG-2455D Asphalt Pavers Conveyor Systems Piston Pump (Conveyor) - Auger Conveyor and Drag Conveyor
12M, 140M and 160M Motor Graders Hydraulic and Steering System Hydraulic System Pressure - Test and Adjust
AccuGrade® Laser (CB420) Bank Valve (Grade Control)