Inspect the area around the machine and under the machine. Look for loose bolts, trash buildup, oil, coolant leakage, broken parts, or worn parts.
Note: Watch closely for leaks. If you observe a leak, find the source of the leak and correct the leak. If you suspect a leak or you observe a leak, check the fluid levels more frequently.
Inspect the condition of the equipment and of the hydraulic components.
Check the condition of the tires. Adjust the inflation pressure, if necessary.
Check all of the oil levels, all of the coolant levels, and all of the fuel levels.
Remove any trash buildup and debris. Make all necessary repairs before you operate the machine.
Make sure that all covers and guards are securely attached.
Make sure that the engine air filter service indicator is not in the red zone.
Grease all of the fittings that need to be serviced on a daily basis.
Daily, perform the procedures that are applicable to your machine:
- Operation and Maintenance Manual, "Backup Alarm - Test"
- Operation and Maintenance Manual, "Cooling System Coolant Level - Check"
- Operation and Maintenance Manual, "Engine Air Filter Service Indicator - Inspect"
- Operation and Maintenance Manual, "Engine Oil Level - Check"
- Operation and Maintenance Manual, "Fuel System Water Separator - Drain"
- Operation and Maintenance Manual, "Hydraulic System Oil Level - Check"
- Operation and Maintenance Manual, "Indicators and Gauges - Test"
- Operation and Maintenance Manual, "Neutral Start Switch - Test"
- Operation and Maintenance Manual, "Seat Belt - Inspect"