Rear Axle - Install
Installation Procedure
Show/hide table
Required Tools     | |||
---|---|---|---|
Tool     | Part Number     | Part Description     | Qty     |
A     | 1U-7505     | Hydraulic Jack     | 1     |
- Use Tooling (A) in order to install rear axle (7). The weight of rear axle (7) is approximately 635 kg (1400 lb).
Show/hide table
Illustration 1 | g01081870 |
- Install bolts (5) and plate (6). Repeat for the other side.
- Remove Tooling (A) .
- Connect hose assembly (4). Repeat for the other side.
Show/hide table
Illustration 2 | g01081869 |
- Install bolt (3) in order to connect differential lock linkage (2) .
Show/hide table
Illustration 3 | g01081868 |
- Connect parking brake linkage (1) .
End By:
- Install the rear drive shaft. Refer to Disassembly and Assembly, "Drive Shaft (Rear) - Remove and Install".
- Install the rear tires. Refer to Disassembly and Assembly, "Tire and Rim (Rear) - Remove and Install".
Caterpillar Information System:
CB-334E and CB-335E Vibratory Compactors Machine Systems Drive Shaft - Remove and Install
446D Backhoe Loader Engine Supplement Refrigerant Condenser - Remove and Install
446D Backhoe Loader Power Train Rear Axle - Remove
446D Backhoe Loader Engine Supplement Fuel Filter and Base - Remove and Install
988H Wheel Loader Machine Systems Evaporator Coil and Heater Coil - Remove
Installation Guide for the Machine Security System on Skid Steer Loaders and Multi Terrain Loaders{7631} Installation Guide for the Machine Security System on Skid Steer Loaders and Multi Terrain Loaders{7631}
446D Backhoe Loader Power Train Drive Shaft (Rear) - Remove and Install
797B Off-Highway Truck Engine Components - Rebuild//Replace/Install Reman - 797B LAA Machines Only
AP-800D and BG-230D Asphalt Pavers Machine Systems Gear Motor (Ventilation)
446D Backhoe Loader Power Train Drive Shaft (Front) - Remove and Install
826H Landfill Compactor, 825H Soil Compactor and 824H Wheel Dozer Engine Supplement Refrigerant Condenser - Remove and Install
826H Landfill Compactor, 825H Soil Compactor and 824H Wheel Dozer Engine Supplement Refrigerant Compressor - Remove and Install
CB-334E and CB-335E Vibratory Compactors Engine Supplement Engine - Install
988H Wheel Loader Machine Systems Evaporator Coil and Heater Coil - Install
CP-323C and CS-323C Paving Compactors Machine Systems Wheel and Tire - Remove and Install
R2900G Load Haul Dump Machine Systems Accumulator Charging Valve (Brake) - Remove
R2900G Load Haul Dump Machine Systems Accumulator Charging Valve (Brake) - Install
2004/06/21 Special Instruction, REHS2149, "Explanation of Common Event Codes and Transmission Shift Matrix" is now Available {4800, 4808}
824H Wheel Dozer, 825H Soil Compactor and 826H Landfill Compactor Machine Systems Front Frame from Rear Frame - Separate
446D Backhoe Loader Power Train Tie Rod (Steering)(Front) - Remove and Install
2004/07/01 Engines Are Now Built with Semi-Crowned Lifter Rollers {1209}
446D Backhoe Loader Power Train Steering Cylinder (Front) - Remove and Install
2004/07/05 Improved Analysis of Non-Warrantable Failures for Reman Vane Cartridges {5055}
988H Wheel Loader Power Train Engagement Pressure for the Transmission Clutch (Operator Monitor) - Calibrate