Axle Housing and Flange - Remove
Show/hide table
Required Tools | |||
Tool | Part Number | Part Description | Qty |
A | 1P-2320 | Combination Puller | 1 |
B | 202-0453 | Spanner Wrench As(1) | 1 |
230-7923 | Spanner Wrench As(2) | 1 | |
C | 2P-8312 | Retaining Ring Pliers | 1 |
Show/hide table
(1) | For use on M95 Spanner Nut |
(2) | For use on M90 Spanner Nut |
Start By:
- Remove the final drive planetary. Refer to Disassembly and Assembly, "Final Drive Planetary - Remove".
- Loosen nut (2). Do not remove nut (2) at this time. Install Tooling (A). Remove tie rod end (1) from the taper of the knuckle. Remove nut (2) and remove tie rod end (1).
Show/hide table
Illustration 2 g01047569 - Remove bolts (5) and remove locking plate (4). Use Tooling (B) to remove spanner nut (3).
Show/hide table
Illustration 3 g01023074 Show/hide tableIllustration 4 g01023075 - Use a suitable pry bar and push the double U-joint toward the wheel flange. Use Tooling (C) and remove retaining ring (8). Remove thrust washer (7) and washer (6).
Show/hide table
Illustration 5 g01023088 - Remove ring gear (9).
Show/hide table
Illustration 6 g01023126 - Remove wheel flange (10).
Note: Bearing cone (11) will fall out of wheel flange (10) when wheel flange (10) is removed.
Show/hide tableIllustration 7 g01023130 - Remove bolts (12). Remove pin assembly (13) and shims (14). Remove bolts (16) and pin assembly (15).
Show/hide table
Illustration 8 g01023136 - The weight of knuckle (17) is approximately
50 kg (110 lb) . Use two people and remove knuckle (17).
Show/hide table
Illustration 1 | g01047618 |
Caterpillar Information System:
2004/08/30 New Bolts Are Used for the Pins on the Brake Group {4251}
R2900G Load Haul Dump Machine Systems Neutralizer Valve (STIC Steering) - Remove and Install
Procedure For Connecting Wire Harnesses To Work Tools{1408, 6060, 6634, 6701, 6706, 6712, 6715} Procedure For Connecting Wire Harnesses To Work Tools{1408, 6060, 6634, 6701, 6706, 6712, 6715}
824K Wheel Dozer, 825K Soil Compactor and 826K Landfill Compactor Machine Systems Brake Control Valve (Service)
826H Landfill Compactor, 825H Soil Compactor and 824H Wheel Dozer Engine Supplement Aftercooler - Remove and Install
2005/04/04 Hitch Pins Are Now Available for the Bumper {7116}
834H Wheel Dozer and 836H Landfill Compactor Electrohydraulic System Combination Valve (Hydraulic Lockout)
826H Landfill Compactor, 825H Soil Compactor and 824H Wheel Dozer Engine Supplement Hydraulic Oil Cooler - Remove and Install
826H Landfill Compactor, 825H Soil Compactor and 824H Wheel Dozer Engine Supplement Belt Tensioner - Remove and Install
826K Landfill Compactor, 825K Soil Compactor and 824K Wheel Dozer Machine Systems Stabilizer Link - Remove and Install
AP-655C and BG-2255C Asphalt Pavers Attachments Piston Pump (Generator) - 23 kW
AP-655C and BG-2255C Asphalt Pavers Attachments Piston Motor (Generator) - 23 kW
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System Relief Valve (Implement) - Test and Adjust
TH350B, TH355B, TH360B, TH460B and TH560B Telehandlers Power Train Axle Housing and Flange - Disassemble
PS-150C Pneumatic Compactor Machine System Air on the Run System Troubleshooting
C11 and C15 Engines for Caterpillar Built Machines CID 0262 FMI 03 5 Volt Sensor DC Power Supply short to +batt
C11 and C15 Engines for Caterpillar Built Machines CID 0262 FMI 04 5 Volt Sensor DC Power Supply short to ground
824H Wheel Dozer, 825H Soil Compactor and 826H Landfill Compactor Machine Systems Cab - Remove
TH350B, TH355B, TH360B, TH460B and TH560B Telehandlers Power Train Axle Housing and Flange - Assemble
TH350B, TH355B, TH360B, TH460B and TH560B Telehandlers Power Train Axle Housing and Flange - Install
2004/06/21 New Software Updates for the IQAN Software Are Now Used on the Track Feller Bunchers {7620}
2004/06/21 New Pressure Sensor Is Now Used {5574}
826H Landfill Compactor, 825H Soil Compactor and 824H Wheel Dozer Engine Supplement Fan Group (Includes Fan, Fan Guard, Fan Shroud, and Hydraulic Fan Motor) - Remove
Guidelines for the Use of High Efficiency Filters for the Hydraulic Oil System and for the Power Train Oil System {3000, 3004, 5050, 5068} Guidelines for the Use of High Efficiency Filters for the Hydraulic Oil System and for the Power Train Oil System {3000, 3004, 5050, 5068}