Axle Housing and Flange - Disassemble
Disassembly Procedure
Show/hide table
Required Tools     | |||
Tool     | Part Number     | Part Description     | Qty     |
A     | 1P-0510     | Driver Gp     | 1     |
B     | 1P-0520     | Driver Gp     | 1     |
Start By:
- Remove the axle housing and the wheel flange. Refer to Disassembly and Assembly, "Axle Housing and Flange - Remove".
- Remove retaining ring (1) and ring gear hub (2) from ring gear (3) .
Show/hide table
Illustration 1 | g01023873 |
- Remove seal (9) from wheel flange (6). Use Tooling (B) and a suitable hammer in order to remove bearing cup (8). Remove spacer (7). Use Tooling (B) and a suitable hammer in order to remove bearing cup (4). Remove O-ring seal (5) .
Show/hide table
Illustration 2 | g01080621 |
- Remove bearing cone (10) and seal (11) from pin assembly (12). Repeat for the other pin assembly.
Show/hide table
Illustration 3 | g01080624 |
- Remove seal (13) from knuckle (14).
Show/hide table
Illustration 4 | g01080626 |
- Remove bearing cone (15) from knuckle (14) .
Show/hide table
Illustration 5 | g01080629 |
- Use Tooling (A) and a suitable hammer in order to remove the bushing from knuckle (14) .
Show/hide table
Illustration 6 | g01080631 |
Caterpillar Information System:
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System Relief Valve (Implement) - Test and Adjust
TH350B, TH355B, TH360B, TH460B and TH560B Telehandlers Power Train Axle Housing and Flange - Remove
2004/08/30 New Bolts Are Used for the Pins on the Brake Group {4251}
R2900G Load Haul Dump Machine Systems Neutralizer Valve (STIC Steering) - Remove and Install
Procedure For Connecting Wire Harnesses To Work Tools{1408, 6060, 6634, 6701, 6706, 6712, 6715} Procedure For Connecting Wire Harnesses To Work Tools{1408, 6060, 6634, 6701, 6706, 6712, 6715}
824K Wheel Dozer, 825K Soil Compactor and 826K Landfill Compactor Machine Systems Brake Control Valve (Service)
826H Landfill Compactor, 825H Soil Compactor and 824H Wheel Dozer Engine Supplement Aftercooler - Remove and Install
2005/04/04 Hitch Pins Are Now Available for the Bumper {7116}
834H Wheel Dozer and 836H Landfill Compactor Electrohydraulic System Combination Valve (Hydraulic Lockout)
826H Landfill Compactor, 825H Soil Compactor and 824H Wheel Dozer Engine Supplement Hydraulic Oil Cooler - Remove and Install
826H Landfill Compactor, 825H Soil Compactor and 824H Wheel Dozer Engine Supplement Belt Tensioner - Remove and Install
826K Landfill Compactor, 825K Soil Compactor and 824K Wheel Dozer Machine Systems Stabilizer Link - Remove and Install
PS-150C Pneumatic Compactor Machine System Air on the Run System Troubleshooting
C11 and C15 Engines for Caterpillar Built Machines CID 0262 FMI 03 5 Volt Sensor DC Power Supply short to +batt
C11 and C15 Engines for Caterpillar Built Machines CID 0262 FMI 04 5 Volt Sensor DC Power Supply short to ground
824H Wheel Dozer, 825H Soil Compactor and 826H Landfill Compactor Machine Systems Cab - Remove
TH350B, TH355B, TH360B, TH460B and TH560B Telehandlers Power Train Axle Housing and Flange - Assemble
TH350B, TH355B, TH360B, TH460B and TH560B Telehandlers Power Train Axle Housing and Flange - Install
2004/06/21 New Software Updates for the IQAN Software Are Now Used on the Track Feller Bunchers {7620}
2004/06/21 New Pressure Sensor Is Now Used {5574}
826H Landfill Compactor, 825H Soil Compactor and 824H Wheel Dozer Engine Supplement Fan Group (Includes Fan, Fan Guard, Fan Shroud, and Hydraulic Fan Motor) - Remove
Guidelines for the Use of High Efficiency Filters for the Hydraulic Oil System and for the Power Train Oil System {3000, 3004, 5050, 5068} Guidelines for the Use of High Efficiency Filters for the Hydraulic Oil System and for the Power Train Oil System {3000, 3004, 5050, 5068}
824H Wheel Dozer, 825H Soil Compactor and 826H Landfill Compactor Machine Systems Cab - Install
988H Wheel Loader Power Train Oil Coolers and Cooling System Operation