Axle Housing and Flange - Assemble
Assembly Procedure
Show/hide table
| Required Tools | |||
| Tool | Part Number | Part Description | Qty |
| A | 1P-0510 | Driver Gp | 1 |
| B | 1P-0520 | Driver Gp | 1 |
- Install bearing cone (15) onto knuckle (14) .
Show/hide table
 | |
| Illustration 1 | g01080629 |
- Use Tooling (A) and a suitable hammer and install the bushing into knuckle (14) .
Show/hide table
 | |
| Illustration 2 | g01080657 |
- Use Tooling (A) and install seal (13) into knuckle (14) .
Show/hide table
 | |
| Illustration 3 | g01080658 |
- Install seal (11) onto pin assembly (12). Raise the temperature of bearing cone (10). Install bearing cone (10) onto pin assembly (12). Repeat for the other pin assembly.
Show/hide table
 | |
| Illustration 4 | g01080624 |
- Use Tooling (B) and a suitable hammer and install bearing cup (4) into wheel flange (6). Install spacer (7). Use Tooling (B) and a suitable hammer and install bearing cup (8) into wheel flange (6). Install seal (9). Install O-ring seal (5) .
Show/hide table
 | |
| Illustration 5 | g01080621 |
- Install ring gear hub (2) into ring gear (3). Install retaining ring (1) .
Show/hide table
 | |
| Illustration 6 | g01023873 |
End By: Install the axle housing and the wheel flange. Refer to Disassembly and Assembly, "Axle Housing and Flange - Install".
Caterpillar Information System:
824H Wheel Dozer, 825H Soil Compactor and 826H Landfill Compactor Machine Systems Cab - Remove
C11 and C15 Engines for Caterpillar Built Machines CID 0262 FMI 04 5 Volt Sensor DC Power Supply short to ground
C11 and C15 Engines for Caterpillar Built Machines CID 0262 FMI 03 5 Volt Sensor DC Power Supply short to +batt
PS-150C Pneumatic Compactor Machine System Air on the Run System Troubleshooting
TH350B, TH355B, TH360B, TH460B and TH560B Telehandlers Power Train Axle Housing and Flange - Disassemble
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System Relief Valve (Implement) - Test and Adjust
TH350B, TH355B, TH360B, TH460B and TH560B Telehandlers Power Train Axle Housing and Flange - Remove
2004/08/30 New Bolts Are Used for the Pins on the Brake Group {4251}
R2900G Load Haul Dump Machine Systems Neutralizer Valve (STIC Steering) - Remove and Install
Procedure For Connecting Wire Harnesses To Work Tools{1408, 6060, 6634, 6701, 6706, 6712, 6715} Procedure For Connecting Wire Harnesses To Work Tools{1408, 6060, 6634, 6701, 6706, 6712, 6715}
824K Wheel Dozer, 825K Soil Compactor and 826K Landfill Compactor Machine Systems Brake Control Valve (Service)
826H Landfill Compactor, 825H Soil Compactor and 824H Wheel Dozer Engine Supplement Aftercooler - Remove and Install
TH350B, TH355B, TH360B, TH460B and TH560B Telehandlers Power Train Axle Housing and Flange - Install
2004/06/21 New Software Updates for the IQAN Software Are Now Used on the Track Feller Bunchers {7620}
2004/06/21 New Pressure Sensor Is Now Used {5574}
826H Landfill Compactor, 825H Soil Compactor and 824H Wheel Dozer Engine Supplement Fan Group (Includes Fan, Fan Guard, Fan Shroud, and Hydraulic Fan Motor) - Remove
Guidelines for the Use of High Efficiency Filters for the Hydraulic Oil System and for the Power Train Oil System {3000, 3004, 5050, 5068} Guidelines for the Use of High Efficiency Filters for the Hydraulic Oil System and for the Power Train Oil System {3000, 3004, 5050, 5068}
824H Wheel Dozer, 825H Soil Compactor and 826H Landfill Compactor Machine Systems Cab - Install
988H Wheel Loader Power Train Oil Coolers and Cooling System Operation
2004/06/28 A New Parking Brake Knob is Now Used {3065}
826H Landfill Compactor, 825H Soil Compactor and 824H Wheel Dozer Engine Supplement Hood and Engine Enclosure - Remove
826H Landfill Compactor, 825H Soil Compactor and 824H Wheel Dozer Engine Supplement Hood and Engine Enclosure - Install
2004/07/05 A New Radiator Has Improved Durability {1353}
2004/06/14 Correction to Operation and Maintenance, SEBU7494 , "Track (Rubber) - Inspect/Adjust" {4197, 4198}