Valve Lifters
Usage:
Remove & Install Valve Lifters
Start By:
a. remove cylinder heads
1. Remove valve lifters (2) with magnet (1).
2. Put identification on each lifter as to its location in the engine for installation purposes.
NOTE: The following steps are for installation of the valve lifters.
3. Put clean engine oil on the valve lifters and camshaft lobes.
4. Install the valve lifters (2) in their original positions in the cylinder block.
NOTE: For more detailed information regarding the valve lifters, see the topic "Valve Rocker Arms And Lifters" in the Specifications Manual.
End By:
a. install cylinder heads
Caterpillar Information System:
3208 MARINE ENGINE Pistons & Connecting Rod Assemblies
3208 MARINE ENGINE Connecting Rod Bearings
3208 MARINE ENGINE Oil Pan
3208 MARINE ENGINE Cylinder Head Assemblies
3208 MARINE ENGINE Fuel Injection Nozzles
3208 MARINE ENGINE Rocker Shaft Assemblies & Push Rods
3208 MARINE ENGINE Crankcase Ventilator
3208 MARINE ENGINE Valve Covers
3208 MARINE ENGINE Governor
3208 MARINE ENGINE Fuel Injection Pump Housing
3208 MARINE ENGINE Fuel Transfer Pump
3208 MARINE ENGINE Fuel Injection Pumps
3208 MARINE ENGINE Crankshaft Main Bearings
3208 MARINE ENGINE Crankshaft Pulley
3208 MARINE ENGINE Crankshaft Front Seal
3208 MARINE ENGINE Timing Gear Cover & Oil Pump
3208 MARINE ENGINE Oil Pump & Relief Valve
3208 MARINE ENGINE Camshaft & Gears
3208 MARINE ENGINE Automatic Timing Advance
3208 MARINE ENGINE Marine Transmission
3208 MARINE ENGINE Flywheel
3208 MARINE ENGINE Flywheel Housing
3208 MARINE ENGINE Crankshaft Rear Seal & Wear Sleeve
3208 MARINE ENGINE Crankshaft & Gear