Limit Switch (Parking Brake and Service Brake)
Show/hide table
Illustration 1 | g01045601 |
Location of the limit switch on the service brake pedal (1) Limit switch (2) Pedal assembly |
(1) 105-8034 Limit Switch Assembly
- Normal position of the contacts ... Closed
- Force for activation ... 28.9 ± 6.7 N (6.50 ± 1.50 lb)
- Operating temperature range ... -40 to 65 °C (-40.0 to 149.0 °F)
- Force for adjustment ... 322 ± 189 N (72.0 ± 43.0 lb)
- maximum length of adjustment ... 12.5 mm (0.49 inch)
- Force for activation ... 28.9 ± 6.7 N (6.50 ± 1.50 lb)
Show/hide table
Illustration 2 | g01045498 |
Location of the limit switch on the parking brake control lever (3) Limit switch (4) Parking brake control lever (5) Actuating mechanism |
Show/hide table
Illustration 3 | g01045501 |
Limit switch |
In position B, contacts (6) and (7) are normally open. In position A, contacts (6) and (8) are normally closed.
(A) The operating position of the switch ... 19.05 ± 0.76 mm (0.750 ± 0.030 inch)
(B) The position of free movement of the switch ... 27.74 mm (1.092 inch)
Operating temperature ... -40° to 80°C (-40° to 176°F)
Minimum voltage for actuation ... 10 Volts
Maximum voltage for actuation ... 28 Volts
Caterpillar Information System:
2004/03/15 USB Cable Connects PC with USB Ports to Communication Adapter or to DataView Tool Group {0785, 0788}
CB-434D and CB-434D XW Vibratory Asphalt Compactor Machine Systems Fan Motor Speed (Radiator Cooling) - Test and Adjust
C13, C15, and C18 Generator Set Engines Can Not Reach Top Engine RPM
446D Backhoe Loader Engine Air Filter Secondary Element - Replace
2004/02/09 Special Instruction, REHS2058 , "Procedure to Convert a Segmented Disc Saw to a One-Piece Disc Saw" is Available {6543}
CB-214E, CB-224E and CB-225E Vibratory Compactors Machine Systems Hydraulic Oil Contamination - Test
446D Backhoe Loader Cab Air Filter - Clean/Replace
D250E Series II and D300E Series II Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems Relief Valve (Hoist Raise, Hoist Lower) - Test and Adjust
R2900G Load Haul Dump Power Train Output Transfer Gears - Adjust
2003/12/29 Special Instruction, REHS0682 , "Procedure to Install an Implement and Steering Lockout for the R2900 Load Haul Dump" is Available {3034}
R2900G Load Haul Dump Power Train Electronic Control System MID 081 - CID 1077 - FMI 03
Troubleshooting Tips Will Help Maintain Steady Engine RPM{1264, 1280} Troubleshooting Tips Will Help Maintain Steady Engine RPM{1264, 1280}
C13, C15, and C18 Generator Set Engines Engine Misfires, Runs Rough or Is Unstable
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Hydraulic and Steering System Relief Valve (Line) - Test and Adjust
914G and 914G2 Compact Wheel Loaders and IT14G and IT14G2 Integrated Toolcarrier Braking System Parking Brake
Procedure for Installing New Fuel Tanks{1273} Procedure for Installing New Fuel Tanks{1273}
914G and 914G2 Compact Wheel Loaders and IT14G and IT14G2 Integrated Toolcarrier Braking System Steering and Brake Manifold Valve
914G and 914G2 Compact Wheel Loaders and IT14G and IT14G2 Integrated Toolcarrier Machine Systems Piston Motor (Hydrostatic)
D7R Series II Track-Type Tractor Final Drive Oil Sample - Obtain
C13, C15, and C18 Generator Set Engines Intermittent Low Power or Power Cutout
R2900G Load Haul Dump Power Train Electronic Control System MID 081 - CID 1401 - FMI 03
IT14G Integrated Toolcarrier and 914G Wheel Loader Steering System Articulated Hitch - Adjust
2004/02/16 Tools Ease the Removal and the Installation of Main Bearing Caps {0700, 0705}
CB-334E and CB-335E Paving Compactors Safety Messages