Engine Starting
Show/hide table
| PERHATIAN |
|---|
Jangan mengengkol engine selama lebih dari 30 detik. Apabila engine tidak dapat dihidupkan, biarkan starter menjadi dingin selama dua menit sebelum melakukan start kembali. Kunci kontak engine harus diputar ke posisi OFF sebelum mencoba melakukan start kembali. |
Show/hide table
 | |
| Ilustrasi 1 | g01029922 |
- Gerakkan kontrol pendorong (2) ke posisi NETRAL.
- Dorong tombol rem parkir (3) ke bawah.
- Tekan kontrol throttle (4) ke arah bawah ke posisi RPM RENDAH.
Show/hide table
 | |
| Ilustrasi 2 | g00993931 |
- Putar kunci (5) ke posisi ON.
- Tekan sakelar untuk busi pijar selama 20 detik untuk memanaskan busi pijar.
Catatan: Jika engine telah panas akibat pengoperasian sebelumnya, busi tidak perlu dipanaskan.
- Bunyikan klakson singkat sebelum menyalakan engine.
- Untuk melakukan start engine, putar kunci (5) ke posisi START. Bila engine telah hidup, lepaskan kunci.
Catatan: Lihat Buku Petunjuk Pengoperasian dan Perawatan, "Pemanasan Engine dan Alat Berat" untuk informasi lebih lanjut.
Caterpillar Information System:
2003/10/20 Improvements to the Orientation of the Fuel Shutoff Valve {1274, 1279, 1329}
248B and 268B Skid Steer Loaders Machine Systems Piston Pump - Assemble
248B and 268B Skid Steer Loaders Machine Systems Piston Pump - Disassemble
725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks and 725, 730, 735 and 740 OEM Articulated Trucks Machine Monitor System Warning Operation
CP-433E, CS-423E and CS-433E Vibratory Soil Compactors Safety Messages
416D, 420D, 424D, 428D, 432D and 442D Backhoe Loaders Axles, Differential and Brakes Differential (Limited Slip)
TH220B and TH330B Telehandlers Power Train Parking Brake - Assemble
R1600G Load Haul Dump Power Train Electronic Control System MID 081 - CID 0626 - FMI 03
R1600G Load Haul Dump Power Train Electronic Control System MID 081 - CID 0623 - FMI 05
R2900G Load Haul Dump Power Train Torque Converter
R1600G Load Haul Dump Power Train Electronic Control System MID 081 - CID 0622 - FMI 05
R1600G Load Haul Dump Remote Control System Transmitter
725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks and 725, 730, 735 and 740 OEM Articulated Trucks Machine Monitor System Diagnostic Operation
725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks and 725, 730, 735 and 740 OEM Articulated Trucks Machine Monitor System Component Description
2003/10/27 Key Must Be Oriented Correctly in Order to Avoid Damage to the Key or Start Switch {1416}
247B and 257B Multi Terrain Loaders Machine Systems Track Tensioner
Installation of Self-Leveling Hydraulics for 267 and 277 Multi Terrain Loaders{5051, 5057, 5066, 5112} Installation of Self-Leveling Hydraulics for 267 and 277 Multi Terrain Loaders{5051, 5057, 5066, 5112}
2003/10/01 New Oil Pan and Integral Seal {1302, 1302, 1302}
2003/10/27 New Oil Pan and Integral Seal {1302, 1302, 1302}
247B and 257B Multi Terrain Loaders Machine Systems Bogie Wheel
2003/10/27 The Function of Lip Seal in Output Transfer Gear Group Is Explained {3159}
416D, 420D, 424D, 428D, 432D and 442D Backhoe Loaders Axles, Differential and Brakes Visual Inspection
416D, 420D, 424D, 428D, 432D and 442D Backhoe Loaders Axles, Differential and Brakes Axle, Differential and Brake Troubleshooting
Installing Counterweights on Multi Terrain Loaders and Skid Steer Loaders{7056} Installing Counterweights on Multi Terrain Loaders and Skid Steer Loaders{7056}