Parking Brake - Assemble
Assembly Procedure
Show/hide table
| Required Tools | |||
|---|---|---|---|
| Tool | Part Number | Part Description | Qty |
| A | 1P-0808 | Multipurpose Grease | 1 |
- Install bolt (16) into torque plate (5) .
Show/hide table
 | |
| Illustration 1 | g01029731 |
- Install torque plate (4) onto bolt (16) and torque plate (5) .
Show/hide table
 | |
| Illustration 2 | g00951229 |
- Apply a thin coat of Tooling (A) to ball bearing (20). Install ball bearing (20) onto cam ring (21). Install cam ring (19) onto ball bearing (20) .
Show/hide table
 | |
| Illustration 3 | g00951226 |
- Install boot (18) and boot (17) onto cam assembly (15) .
Show/hide table
 | |
| Illustration 4 | g01029729 |
- Slide cam assembly (15) over bolt (16) and onto torque plate (4). Make sure that you align the dowels on cam assembly (15) with the dowel holes in torque plate (4) .
Show/hide table
 | |
| Illustration 5 | g00951230 |
- Align the dowel holes in lever (14) with the dowels on cam assembly (15). Install lever (14) into position. Refer to illustration 7 for the correct position. Install thrust (13), washer (12), washer (11), nut (10) and nut (9) .
Note: Nut (10) and nut (9) can only be adjusted when the parking brake is installed on the machine. Refer to Disassembly and Assembly, "Parking Brake - Install" for the correct adjustment procedure.
Show/hide table
 | |
| Illustration 6 | g01032107 |
Show/hide table
 | |
| Illustration 7 | g00951253 |
- Install seals (6) between torque plate (4) and torque plate (5). Install sleeves (7) and nuts (8) onto bolts (3). Apply a thin coat of Tooling (A) onto sleeves (7) before sliding bolts (3) and sleeves (7) into torque plates (4) and (5) .
Show/hide table
 | |
| Illustration 8 | g01029751 |
- Nuts (8) can only be adjusted when the parking brake is installed on the machine. Refer to Disassembly and Assembly, "Parking Brake - Install" for the correct adjustment procedure.
- Install lining assemblies (2) into the parking brake.
Show/hide table
 | |
| Illustration 9 | g00950993 |
- Install retaining spring (1) .
Show/hide table
 | |
| Illustration 10 | g00950992 |
Show/hide table
 |
Personal injury can result from being struck by parts propelled by a released spring force. Make sure to wear all necessary protective equipment. Follow the recommended procedure and use all recommended tooling to release the spring force. |
 |
End By: Install the parking brake. Refer to Disassembly and Assembly, "Parking Brake - Install".
Caterpillar Information System:
R1600G Load Haul Dump Power Train Electronic Control System MID 081 - CID 0626 - FMI 03
R1600G Load Haul Dump Power Train Electronic Control System MID 081 - CID 0623 - FMI 05
R2900G Load Haul Dump Power Train Torque Converter
R1600G Load Haul Dump Power Train Electronic Control System MID 081 - CID 0622 - FMI 05
R1600G Load Haul Dump Remote Control System Transmitter
R1600G Load Haul Dump Power Train Electronic Control System MID 081 - CID 0621 - FMI 05
725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks and 725, 730, 735 and 740 OEM Articulated Trucks Machine Monitor System Data Link
824H Wheel Dozer, 825H Soil Compactor and 826H Landfill Compactor Engine Oil and Filter - Change
CP-433E, CS-423E and CS-433E Vibratory Soil Compactors Leveling Blade Control - If Equipped
267, 277 and 287 Multi Terrain Loaders Engine Supplement Engine - Install - 287 Multi Terrain Loaders
267, 277 and 287 Multi Terrain Loaders Engine Supplement Engine - Remove - 287 Multi Terrain Loaders
CP-433E, CS-423E and CS-433E Vibratory Soil Compactors Parking
416D, 420D, 424D, 428D, 432D and 442D Backhoe Loaders Axles, Differential and Brakes Differential (Limited Slip)
CP-433E, CS-423E and CS-433E Vibratory Soil Compactors Safety Messages
725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks and 725, 730, 735 and 740 OEM Articulated Trucks Machine Monitor System Warning Operation
248B and 268B Skid Steer Loaders Machine Systems Piston Pump - Disassemble
248B and 268B Skid Steer Loaders Machine Systems Piston Pump - Assemble
2003/10/20 Improvements to the Orientation of the Fuel Shutoff Valve {1274, 1279, 1329}
CP-533E and CS-533E Vibratory Soil Compactors Engine Starting
725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks and 725, 730, 735 and 740 OEM Articulated Trucks Machine Monitor System Diagnostic Operation
725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks and 725, 730, 735 and 740 OEM Articulated Trucks Machine Monitor System Component Description
2003/10/27 Key Must Be Oriented Correctly in Order to Avoid Damage to the Key or Start Switch {1416}
247B and 257B Multi Terrain Loaders Machine Systems Track Tensioner
Installation of Self-Leveling Hydraulics for 267 and 277 Multi Terrain Loaders{5051, 5057, 5066, 5112} Installation of Self-Leveling Hydraulics for 267 and 277 Multi Terrain Loaders{5051, 5057, 5066, 5112}