Assembly Procedure
Show/hide table
Table 1
Required Tools     |
Tool     |
Part Number     |
Part Description     |
Qty     |
A     |
1P-1857     |
Retaining Ring Pliers     |
1     |
Show/hide table
|
|
|
Illustration 1 | g01029925 |
- Lower the temperature of bearing cup (28) .
- Install bearing cup (28) .
- Install O-ring seal (27) .
- Use Tooling (A) in order to install retaining ring (26) .
Show/hide table
|
|
|
Illustration 2 | g01029899 |
- Install bearings (24) and bearing cone (25) .
Show/hide table
|
|
|
Illustration 3 | g01029897 |
Show/hide table
|
Improper assembly of parts that are spring loaded can cause bodily injury. To prevent possible injury, follow the established assembly procedure and wear protective equipment. |
|
- Install piston (20), spring (19), pin (23), and retaining ring (22) onto swashplate assembly (21) .
Show/hide table
|
|
|
Illustration 4 | g01029896 |
- Install swashplate assembly (21) .
- Compress spring (19). Position piston (20) into the original position.
Show/hide table
|
|
|
Illustration 5 | g01029895 |
- Install shaft (18) .
Show/hide table
|
|
|
Illustration 6 | g01029893 |
Show/hide table
|
|
|
Illustration 7 | g01029894 |
Show/hide table
|
Improper assembly of parts that are spring loaded can cause bodily injury. To prevent possible injury, follow the established assembly procedure and wear protective equipment. |
|
- Use a suitable press in order to install washer (17), spring (16), washer (15), and retaining ring (14) into barrel (9) .
Show/hide table
|
|
|
Illustration 8 | g01029892 |
- Install bearing (12) and pins (13) into barrel (9) .
Show/hide table
|
|
|
Illustration 9 | g01029891 |
- Install the string to pistons (10), and retainer (11) .
Show/hide table
|
|
|
Illustration 10 | g01029890 |
Note: Use a string in order to install the barrel and pistons.
- Install barrel (9) and pistons (10) together.
- Remove the string.
Show/hide table
|
|
|
Illustration 11 | g01029889 |
- Install bearing cone (7) and port plate (8) .
Show/hide table
|
|
|
Illustration 12 | g01029888 |
Show/hide table
|
Improper assembly of parts that are spring loaded can cause bodily injury. To prevent possible injury, follow the established assembly procedure and wear protective equipment. |
|
- Install pin (5) and the spring.
- Install bearing cup (6) .
Show/hide table
|
|
|
Illustration 13 | g01029887 |
Show/hide table
|
Improper assembly of parts that are spring loaded can cause bodily injury. To prevent possible injury, follow the established assembly procedure and wear protective equipment. |
|
- Install bolts (3) and head (4) .
Show/hide table
|
|
|
Illustration 14 | g01029886 |
- Install bolts (1), pump control (2), and the O-ring seals.
End By:
Install the piston pump. Refer to Disassembly and Assembly, "Piston Pump - Install".