The Function of Lip Seal in Output Transfer Gear Group Is Explained {3159}
- Articulated Truck:
- 735 (S/N: AWR1-UP)
- 740 (S/N: AXM1-UP)
- 740 EJECTOR (S/N: AZZ1-UP)
Show/hide table
 | |
| Illustration 1 | g01030460 |
Typical example of an output transfer gear on a 735 Articulated Truck | |
Show/hide table
 | |
| Illustration 2 | g01030028 |
Lip seal (2) that is installed in the end of shaft (1) provides an obstruction to oil flow from tube (3). The lip seal acts as a oil dam in order to retain lubrication oil in the bore of the shaft. The lip seal is not intended to make a seal around the tube. The part numbers of the lip seals, shafts and the tubes for the 735, 740 and 740 EJECTOR Articulated Trucks are given in Table 1.
Show/hide table
| 735 | 740 and 740 EJECTOR |
||
| Item | Description | Part Number | Part Number |
| 1 | Shaft | 161-4252 | 148-9428 |
| 2 | Lip Seal | 6V-5029 | 4B-5432 |
| 3 | Tube | 148-9313 | 148-9313 |
Caterpillar Information System:
247B and 257B Multi Terrain Loaders Machine Systems Bogie Wheel
2003/10/27 New Oil Pan and Integral Seal {1302, 1302, 1302}
2003/10/01 New Oil Pan and Integral Seal {1302, 1302, 1302}
Installation of Self-Leveling Hydraulics for 267 and 277 Multi Terrain Loaders{5051, 5057, 5066, 5112} Installation of Self-Leveling Hydraulics for 267 and 277 Multi Terrain Loaders{5051, 5057, 5066, 5112}
247B and 257B Multi Terrain Loaders Machine Systems Track Tensioner
2003/10/27 Key Must Be Oriented Correctly in Order to Avoid Damage to the Key or Start Switch {1416}
725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks and 725, 730, 735 and 740 OEM Articulated Trucks Machine Monitor System Component Description
725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks and 725, 730, 735 and 740 OEM Articulated Trucks Machine Monitor System Diagnostic Operation
CP-533E and CS-533E Vibratory Soil Compactors Engine Starting
2003/10/20 Improvements to the Orientation of the Fuel Shutoff Valve {1274, 1279, 1329}
248B and 268B Skid Steer Loaders Machine Systems Piston Pump - Assemble
248B and 268B Skid Steer Loaders Machine Systems Piston Pump - Disassemble
416D, 420D, 424D, 428D, 432D and 442D Backhoe Loaders Axles, Differential and Brakes Visual Inspection
416D, 420D, 424D, 428D, 432D and 442D Backhoe Loaders Axles, Differential and Brakes Axle, Differential and Brake Troubleshooting
Installing Counterweights on Multi Terrain Loaders and Skid Steer Loaders{7056} Installing Counterweights on Multi Terrain Loaders and Skid Steer Loaders{7056}
267, 277 and 287 Multi Terrain Loaders Machine Systems Quick Coupler - Remove and Install - Hydraulic
PL61 Pipelayer Battery - Inspect
2003/10/20 Special Instruction, REHS1772, "A Procedure to Install New Supports for the Fender" Is Available {7252}
2003/10/20 Special Instruction, REHS1776, "Installation Procedure for 188-8697 Bearing that is Located in the Rear Suspension Group" Is Available {7213}
247B2 and 257B2 Multi Terrain Loaders Fuel Tank Water and Sediment - Drain
267, 277 and 287 Multi Terrain Loaders Machine Systems Seat - Remove and Install - 287 Multi Terrain Loader
216, 226, 232 and 242 Skid Steer Loaders Machine Systems Cab - Remove - With Air Conditioning
216, 226, 232 and 242 Skid Steer Loaders Machine Systems Cab - Install - With Air Conditioning
725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks and 725, 730, 735 and 740 OEM Articulated Trucks Machine Monitor System Connector Contact Description