12H Motor Grader Engine Supplement Caterpillar

Removal Procedure

Start By:

1. Remove the fuel tank. Refer to Disassembly and Assembly, "Fuel Tank (Right Side) - Remove".
2. Remove the alternator. Refer to Disassembly and Assembly, "Alternator - Remove and Install".

Note: SERVICE DATA: TOOLING (ZZ) WILL NOT BE IDENTIFIED IN PHOTOGRAPHS IN THE REMOVAL OR THE INSTALLATION. THIS TOOLING IS SHOWN IN ORDER TO ASSIST THE EXPERIENCED SERVICEMAN.

1. Drain the cooling system. Refer to Operation and Maintenance Manual, "Cooling System Level - Check" for the correct procedure.

Show/hide table



Illustration 1	g01020197

2. Remove bolts (1) and plate (2) .

Show/hide table



Illustration 2	g01020201

3. Loosen clamp (3) and slide clamp (3) upward.

4. Disconnect hose assembly (4) .

5. Remove bolts (6) and remove bracket (5) .

6. Remove bolts (7) and position elbow (8) out of the way.

7. Remove bolts (9) .

8. Remove water pump (10) .