Final Drive - Install
Show/hide table
| Required Tools | |||
|---|---|---|---|
| Tool | Part Number | Part Description | Qty |
| A | 138-7574 | Link Bracket | 2 |
| B | 9U-5343 | Guide Stud M24 x 3 | 2 |
- Install Tooling (B) into final drive (1A). Tooling (B) should be installed 180 degrees from each other. Install a suitable lifting device with Tooling (A) and install the final drive, as shown. The weight of the final drive with the travel motor is approximately
576 (1270 lb) .Show/hide table
Illustration 2 g01019813 - Install eighteen mounting bolts (7). Remove Tooling (B) and install the last two mounting bolts (7). Tighten the mounting bolts to a torque of
900 ± 100 N·m (660 ± 75 lb ft) .Show/hide table
Illustration 3 g01019385 - Connect four hose assemblies (3), (4), (5) and (6) to the travel motor.
Show/hide table
Illustration 4 g01019383 - Install cover (2). Use two people in order to install the cover. Install bolts (1).
Show/hide table
| |
| Illustration 1 | g01019812 |
End By:
- Connect the track assembly. Refer to Disassembly and Assembly, "Track - Connect".
Caterpillar Information System:
267B, 277B and 287B Multi Terrain Loaders Machine Systems Radiator and Hydraulic Oil Cooler
572R Series II Pipelayer Power Train Transmission
12H Motor Grader Engine Supplement Refrigerant Compressor - Remove and Install
12H Motor Grader Engine Supplement Turbocharger - Remove and Install
R2900G Load Haul Dump Steering System Steering System Troubleshooting
R2900G Load Haul Dump Steering System Steering System (High Pressure Oil Circuit)
120H and 135H Motor Graders 3126B Engine Supplement Alternator - Remove and Install
Load Haul Dump Power Train Cab Mounting
12H Motor Grader Engine Supplement Electric Starting Motor - Remove and Install
777D and 777D HAA Off-Highway Truck and 776D Off-Highway Tractor Operation Information
248B and 268B Skid Steer Loaders Machine Systems Control Valve (Work Tool)
TK711, TK721, TK722 and TK732 Track Feller Bunchers Machine Systems Main Control Valve - Assemble
12H Motor Grader Engine Supplement Unit Injector Hydraulic Pump - Remove and Install
572R Series II Pipelayer Bevel and Transfer Gears
TK711, TK721, TK722 and TK732 Track Feller Bunchers Machine Systems Travel Motor - Install
572R Series II Pipelayer Power Train Drive Shaft
TH220B and TH330B Telehandlers Machine Systems Control Valve (Trailer and Towing Hitch) - Install
12H Motor Grader Engine Supplement Water Pump - Remove
12H Motor Grader Engine Supplement Water Pump - Install
572R Series II Pipelayer Power Train Steering Clutches and Brakes
Computer Aided Earthmoving System Basic (CAESBasic) Additional Utilities
TK711, TK721, TK722 and TK732 Track Feller Bunchers Machine Systems Air Conditioner - Install
259B3 Compact Track Loader, 247B3 and 257B Series 3 Multi Terrain Loaders and 216B Series 3, 226B3, 236B3, 242B Series 3 and 252B Series 3 Skid Steer Loaders Radiator and Hydraulic Oil Cooler (Fan)
267, 277 and 287 Multi Terrain Loaders Machine Systems Fuel Tank - Remove and Install - 287 Multi Terrain Loader