PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND RETURNING CERTAIN REMAN AIR COMPRESSORS
Usage:
REBE3235-02
Show/hide table
| 05Feb2008 |
| (Revised 07Apr2008) |
U-61
A-51
D-47
O-55
TT-7
Show/hide table
| Parts stock action only | PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND RETURNING CERTAIN REMAN AIR COMPRESSORS |
|
| 1803 7750 | PI70248 |
|
Show/hide table
| NOTE: | The information supplied in this service letter may not be valid after the termination date of this program. Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst. |
Show/hide table
Show/hide table
| NOTE: | This Revised Service Letter replaces the 05Feb2008 Service Letter. Changes have been made to Action Required to extend the date code range of the affected parts. |
Show/hide table
TERMINATION DATE |
| 28Feb2009 |
PROBLEM
Show/hide table
| Certain Reman air compressors can fail. If the compressor fails it will cause damage to the engine front gear train. |
ACTION REQUIRED
Show/hide table
| Dealers should inspect certain Reman compressors in Dealer Parts Stock associated with this failure. Compressors with potential failures were made between the dates of May 7, 2007 and December 20, 2007. Refer to Image1 for part numbers of Reman Air Compressors to inspect. The first character is the build shift (1 or 2), the second character is the build month, third and fourth character are for the date of the month, followed by the last two digits of the build year. G or H in the seventh character position indicates a Reman assembly. Start Date: 1E0707GX End Date: 2M2007GX Letter to month reference: E = May F = June G = July H = August J = September K = October L = November M = December Refer to Image2 for example of date code details. |
Show/hide table
|
| Image1 |
|
| Image2 |
SERVICE CLAIM ALLOWANCES
Show/hide table
| Submit one claim for all parts removed from dealer parts stock. |
PARTS DISPOSITION
Show/hide table
| Any parts removed from parts stock should be returned on your next core shipment to local core inspection facility. Please Ignore the Normal 15 day holding period requirement. Package these parts separately from normal cores on shipment and label each case with PI7XXXX (This program number). All parts returned must have a Core Credit Request (CCR) entered into CMIS2 to allow for core credit refund to be processed. Document your Cat warranty claim number on the CCR to ensure 100% core credit is processed for the returned parts. |
Caterpillar Information System:
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING EXHAUST COMBUSTION GROUPS INCLUDING EXTENSION PIPES ON CERTAIN 2007 C15 ON-HIGHWAY TRUCK ENGINES INSTALLED IN FREIGHTLINER CHASSIS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING EXHAUST COMBUSTION GROUPS INCLUDING EXTENSION PIPES ON CERTAIN 2007 C15 ON-HIGHWAY TRUCK ENGINES INSTALLED IN FREIGHTLINER CHASSIS
PRODUCT SUPPORT PROGRAM FOR UPDATING SOFTWARE ON CERTAIN C13 AND C15 ON-HIGHWAY TRUCK ENGINES PRODUCT SUPPORT PROGRAM FOR UPDATING SOFTWARE ON CERTAIN C13 AND C15 ON-HIGHWAY TRUCK ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE WATER PUMP ON CERTAIN C4.4 AND C6.6 ENGINE INSTALLATIONS PRODUCT SUPPORT PROGRAM FOR REPLACING THE WATER PUMP ON CERTAIN C4.4 AND C6.6 ENGINE INSTALLATIONS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING AFTERTREATMENT REGENERATION DEVICE (ARD) BODY AND HEAD ON CERTAIN 2007 C13 ON-HIGHWAY TRUCK ENGINES INSTALLED IN WESTERN STAR CHASSIS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING AFTERTREATMENT REGENERATION DEVICE (ARD) BODY AND HEAD ON CERTAIN 2007 C13 ON-HIGHWAY TRUCK ENGINES INSTALLED IN WESTERN STAR CHASSIS
PRODUCT SUPPORT PROGRAM FOR INSTALLING OIL FILL TUBES ON CERTAIN C13 AND C15 ON-HIGHWAY TRUCK ENGINES PRODUCT SUPPORT PROGRAM FOR INSTALLING OIL FILL TUBES ON CERTAIN C13 AND C15 ON-HIGHWAY TRUCK ENGINES
PRODUCT SUPPORT PROGRAM FOR REWORKING OIL FILL TUBES ON CERTAIN 2007 C13 AND C15 ON-HIGHWAY TRUCK ENGINES PRODUCT SUPPORT PROGRAM FOR REWORKING OIL FILL TUBES ON CERTAIN 2007 C13 AND C15 ON-HIGHWAY TRUCK ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE ENGINE ELECTRONIC CONTROL MODULE (ECM) SOFTWARE AND POSSIBLY THE INJECTORS ON CERTAIN C18 INDUSTRIAL ENGINES PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE ENGINE ELECTRONIC CONTROL MODULE (ECM) SOFTWARE AND POSSIBLY THE INJECTORS ON CERTAIN C18 INDUSTRIAL ENGINES
PRODUCT SUPPORT PROGRAM FOR INSTALLING THE ENGINE CONTROL SOFTWARE ON CERTAIN C9 ON-HIGHWAY TRUCK ENGINES INSTALLED IN BUS CHASSIS PRODUCT SUPPORT PROGRAM FOR INSTALLING THE ENGINE CONTROL SOFTWARE ON CERTAIN C9 ON-HIGHWAY TRUCK ENGINES INSTALLED IN BUS CHASSIS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE 5N-3765 GENERATOR SET COUPLING WITH A 247-0308 COUPLING ON CERTAIN G3520C GENERATOR SETS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE 5N-3765 GENERATOR SET COUPLING WITH A 247-0308 COUPLING ON CERTAIN G3520C GENERATOR SETS
PRODUCT SUPPORT PROGRAM FOR REWORKING 289-3607 FLEXPLATES ON CERTAIN C10 INDUSTRIAL ENGINES PRODUCT SUPPORT PROGRAM FOR REWORKING 289-3607 FLEXPLATES ON CERTAIN C10 INDUSTRIAL ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE WATER PUMP ON CERTAIN C6.6 ENGINES PRODUCT SUPPORT PROGRAM FOR REPLACING THE WATER PUMP ON CERTAIN C6.6 ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE FUEL FILTER ON CERTAIN 3508B MARINE GENSETS AND 3516B MARINE PROPULSION ENGINES PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE FUEL FILTER ON CERTAIN 3508B MARINE GENSETS AND 3516B MARINE PROPULSION ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 216-1598 SPRING-GUIDES FROM DEALER PARTS STOCK PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 216-1598 SPRING-GUIDES FROM DEALER PARTS STOCK
PRODUCT SUPPORT PROGRAM TO INSPECT THE 7W-4979 CHECK VALVE THAT MAY HAVE BEEN INCORRECTLY INSTALLED ON CERTAIN C32 GENSET OIL LEVEL REGULATOR DRAIN LINES PRODUCT SUPPORT PROGRAM TO INSPECT THE 7W-4979 CHECK VALVE THAT MAY HAVE BEEN INCORRECTLY INSTALLED ON CERTAIN C32 GENSET OIL LEVEL REGULATOR DRAIN LINES
PRODUCT SUPPORT PROGRAM FOR INSPECTING AND POSSIBLY REPLACING THE 5P-1251 HOSE RUBBING ON ALTERNATOR GUARD ON CERTAIN C9 GENSETS PRODUCT SUPPORT PROGRAM FOR INSPECTING AND POSSIBLY REPLACING THE 5P-1251 HOSE RUBBING ON ALTERNATOR GUARD ON CERTAIN C9 GENSETS
PRODUCT SUPPORT PROGRAM FOR REPLACING EXHAUST RISERS ON CERTAIN C32 ENGINES PRODUCT SUPPORT PROGRAM FOR REPLACING EXHAUST RISERS ON CERTAIN C32 ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE OIL FILLER CAP ON C11, C13, AND C15 TRUCK ENGINES IN CERTAIN KENWORTH 2005-2007 T2000 CHASSIS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE OIL FILLER CAP ON C11, C13, AND C15 TRUCK ENGINES IN CERTAIN KENWORTH 2005-2007 T2000 CHASSIS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING ENGINE ACTUATORS FOR DAMAGE TO THE SOLENOIDS PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING ENGINE ACTUATORS FOR DAMAGE TO THE SOLENOIDS
PRODUCT IMPROVEMENT PROGRAM FOR REWIRING CERTAIN 3508, 3508B, 3512, 3512B, 3516, 3516B, AND 3516C GENSETS WITH EMCP 3.X PRODUCT IMPROVEMENT PROGRAM FOR REWIRING CERTAIN 3508, 3508B, 3512, 3512B, 3516, 3516B, AND 3516C GENSETS WITH EMCP 3.X
PRODUCT SUPPORT PROGRAM FOR UPDATING SOFTWARE ON CERTAIN C9 ON-HIGHWAY TRUCK ENGINES PRODUCT SUPPORT PROGRAM FOR UPDATING SOFTWARE ON CERTAIN C9 ON-HIGHWAY TRUCK ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE CAN DATA LINK ON CERTAIN 3508B, 3508C, 3512B, 3512C, 3516B, 3516C, G3508, G3512, G3516, G3516C, G3516E, G3520B, AND G3520C ENGINES PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE CAN DATA LINK ON CERTAIN 3508B, 3508C, 3512B, 3512C, 3516B, 3516C, G3508, G3512, G3516, G3516C, G3516E, G3520B, AND G3520C ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TRANSMISSION OIL FILTER ON CERTAIN TH48-E80 TRANSMISSIONS PRODUCT SUPPORT PROGRAM FOR REPLACING THE TRANSMISSION OIL FILTER ON CERTAIN TH48-E80 TRANSMISSIONS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 273-2084 PANEL ASSEMBLY ON CERTAIN C15 SOUND ATTENUATED GENERATOR SETS PRODUCT SUPPORT PROGRAM FOR REPLACING THE 273-2084 PANEL ASSEMBLY ON CERTAIN C15 SOUND ATTENUATED GENERATOR SETS
PRODUCT SUPPORT PROGRAM FOR INSPECTING AND, IF NECESSARY, REPLACING EXHAUST MANIFOLD CUP PLUGS ON 4EZ DV-3126 ENGINES PRODUCT SUPPORT PROGRAM FOR INSPECTING AND, IF NECESSARY, REPLACING EXHAUST MANIFOLD CUP PLUGS ON 4EZ DV-3126 ENGINES