Inlet Manifold
Show/hide table
Illustration 1 | g06195013 |
Show/hide table
Illustration 2 | g06194999 |
Bolt (1) tightening sequence for aftercooler assembly |
Show/hide table
Illustration 3 | g06194996 |
Bolt (2) tightening sequence for manifold assembly |
Show/hide table
Specification for 442-6326 Inlet Manifold Gp | |||
---|---|---|---|
Item | Qty | Part | Specification Description |
1 | 16 | 0T-0065 Bolt | Use the following procedure to tighten the bolts: 1. Tighten the bolts at the locations called 1 to 2. Tighten the bolts at the locations called 2 to 3. Tighten the bolts at the locations called 3 to 4. Tighten the bolts at the locations called 4 to |
2 | 10 | 261-5615 Bolt | Use the following procedure to tighten the bolts: 1. Tighten the bolts at the locations called 1 to 2. Tighten the bolts at the locations called 2 to 3. Tighten the bolts at the locations called 3 to |
3 | 12 | 6V-5101 O-Ring Seal | Lubricate the bore lightly with the 5P-3975 Rubber Lubricant. |
Caterpillar Information System:
A New Reducer Hose Is Used on Certain 3512C Commercial Engines {1051} A New Reducer Hose Is Used on Certain 3512C Commercial Engines {1051}
C11 and C13 Industrial Engines Piston and Rings
C11 and C13 Industrial Engines Cylinder Head
C9.3B Engines for Caterpillar Built Machines Housing (Front) - Remove
323F LN MHPU Capacities (Refill)
320 GC, 320 and 323 Excavator Machine Systems Travel Motor
320 GC, 320 and 323 Excavator Machine Systems Oil Makeup (Travel System)
C11 and C13 Engines Cylinder Head Valves
C175-16 Locomotive Engines Crankshaft Vibration Damper seals - Replace
C13, C15, and C18 Tier 4 Final Engines SCR Inducement Emergency Override
Different Housings are Used on 3400 Remanufactured Engines {1304} Different Housings are Used on 3400 Remanufactured Engines {1304}
C11 and C13 Engines Cylinder Liner
3500E Marine Engines Inlet Manifold
G3516 Petroleum Engines Fuel Control Valve - Remove and Install - Low Pressure
3500E Marine Engines Cylinder Head
C9.3B Engines for Caterpillar Built Machines Housing (Front) - Install
320 GC, 320 and 323 Excavator Machine Systems Swing System
3500E Marine Engines Cylinder Block
320GC, 320 and 323 Excavators Machine Systems Swing Drive - Disassemble
320GC, 320 and 323 Excavators Machine Systems Swing Drive - Assemble
3516E Generator Set Engines Pressure Sensor (DEF)
3500E Marine Engines Exhaust Manifold
3500E Marine Engines Nitrogen Oxide Sensor (Engine Exhaust Out)
3500E Marine Engines Nitrogen Oxide Sensor (Exhaust Pipe Out)