G3516 Petroleum Engines Caterpillar


Fuel Control Valve - Remove and Install - Low Pressure

Usage:

G3516 AL7

Removal Procedure


NOTICE

Keep all parts clean from contaminants.

Contaminants may cause rapid wear and shortened component life.


  1. Turn OFF the gas supply.


    Illustration 1g06195176

  2. Disconnect the harness assembly (2) from fuel control valve (1).

  3. Remove eight bolts (3).

  4. Remove nuts (4) and fuel control valve (1). Remove the gaskets from the tube assemblies.

Installation Procedure


NOTICE

Keep all parts clean from contaminants.

Contaminants may cause rapid wear and shortened component life.


------ WARNING! ------

Fuel leaked or spilled onto hot surfaces or electrical components can cause a fire.

Turn the disconnect switch OFF when draining and/or removing any fuel system components.


  1. Replace gaskets and install the fuel control valve (1) in reverse the order of removal.
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.