C11 and C13 Engines Caterpillar


Cylinder Liner

Usage:

730C2 2L7


Illustration 1g02543584
Outside diameter of the cylinder liners
(1) Cylinder block liner
(2) Liner seal

Table 1
Specification for 469-5315 Cylinder Liner 
Item  Qty  Part  Specification Description 
Diameter is 147.9 mm (5.82 inch)
Diameter is 145.12 ± 0.05 mm (5.713 ± 0.001 inch)
Diameter is 139.57 ± 0.13 mm (5.494 ± 0.005 inch)

Caterpillar Information System:

793F and 797F Off-Highway Truck VIMS and Truck Payload Measurement System System Schematic
793F and 797F Off-Highway Truck VIMS and Truck Payload Measurement System Glossary of Terms
793F and 797F Off-Highway Truck VIMS and Truck Payload Measurement System Connector Contact Description
793F and 797F Off-Highway Truck VIMS and Truck Payload Measurement System Off-Board Service Tool
793F and 797F Off-Highway Truck VIMS and Truck Payload Measurement System Cable Connections
793F and 797F Off-Highway Truck VIMS and Truck Payload Measurement System Router - Configure
793F and 797F Off-Highway Truck VIMS and Truck Payload Measurement System ECM - Configure
793F and 797F Off-Highway Truck VIMS and Truck Payload Measurement System ECM - Replace
793F and 797F Off-Highway Truck VIMS and Truck Payload Measurement System ECM Software - Install
793F and 797F Off-Highway Truck VIMS and Truck Payload Measurement System Display Module - Replace
793F and 797F Off-Highway Truck VIMS and Truck Payload Measurement System Payload System - Configure
793F and 797F Off-Highway Truck VIMS and Truck Payload Measurement System Payload System - Calibrate
Different Housings are Used on 3400 Remanufactured Engines {1304} Different Housings are Used on 3400 Remanufactured Engines {1304}
C13, C15, and C18 Tier 4 Final Engines SCR Inducement Emergency Override
C175-16 Locomotive Engines Crankshaft Vibration Damper seals - Replace
C11 and C13 Engines Cylinder Head Valves
320 GC, 320 and 323 Excavator Machine Systems Oil Makeup (Travel System)
320 GC, 320 and 323 Excavator Machine Systems Travel Motor
323F LN MHPU Capacities (Refill)
C9.3B Engines for Caterpillar Built Machines Housing (Front) - Remove
C11 and C13 Industrial Engines Cylinder Head
C11 and C13 Industrial Engines Piston and Rings
A New Reducer Hose Is Used on Certain 3512C Commercial Engines {1051} A New Reducer Hose Is Used on Certain 3512C Commercial Engines {1051}
3500E Marine Engines Inlet Manifold
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.