Medium L and M Series Wheel Loaders Cat Production Measurement Application on Machines Equipped with Product Link: PLE631 or PLE641 Caterpillar

Machine Totals

Illustration 1	g06003467
Main Performance page (1) Totals button

1. To view Machine Totals, press the "Totals" button (1).

   The "Totals" page will appear.

2. Scroll through the "Totals" items using the Up and Down arrows on the right side of the display.

3. Press a menu item to select.

   The selected item will highlight in blue.

4. Press "OK" to access information in the selected menu item.

Lifetime Totals

Path: Totals > Lifetime

The Lifetime Cycle Count and Total Payload are incremented only when payload data is stored either through a manual store button press or through auto-store.

Note: If third-party payload is installed, these figures are updated whenever the third-party payload system updates.

Illustration 2	g06131101
(2) Back button

1. Press the "Totals" button (1).

   The "Totals" menu page will appear.

2. Press "Lifetime".

   "Lifetime" will highlight in blue and the "Lifetime" page will appear showing the machine lifetime totals.

3. Press the Back button (2) to return to the previous menu.

Trip A Totals

Illustration 3	g06129655

Illustration 4	g06128005
Trip A screens (3) Reset button

Path: Totals > Trip A

For the trip totals, the Cycle Count and Total Payload are incremented only when payload data is stored either through:

• A manual store button press

• An auto-store

The Production Rate is the Total Payload divided by the Total Operating Hours since the last Trip reset. The Production Efficiency is the Total Payload divided by the Total Fuel used since the last Trip Reset.

Note: For best results, store or clear the Main Payload Screen prior to recording or resetting the Trip Totals.

1. Press the "Totals" button (1).

   The "Totals" menu page will appear.

2. Press "Trip A".

   "Trip A" will highlight in blue and the "Trip A" page will appear showing the machine "Trip A" information.

   Note: The "Reset" button (3) appears on the right side of the "Trip A" Totals page. Press the "Reset" button (3) to clear "Trip A" Totals. The "Trip A" page will appear showing "Confirm Reset?".

   Show/hide table

   Illustration 5	g06128022
   (2) Back button

3. Press OK to confirm Trip A Reset.

4. Press the Back button (2) to return to the previous menu.

Note: When third-party payload is used Trip A, Trip B, and Material Totals will not be available.

Trip B Totals

Illustration 6	g06128012

Illustration 7	g06128015
Trip B screens (3) Reset button

Path: Totals > Trip B

For the trip totals, the Cycle Count and Total Payload are incremented only when payload data is stored either through:

• A manual store button press

• An auto-store

The Production Rate is the Total Payload divided by the Total Operating Hours since the last Trip reset. The Production Efficiency is the Total Payload divided by the Total Fuel used since the last Trip Reset.

Note: For best results, store or clear the Main Payload Screen prior to recording or resetting the Trip Totals.

1. Press the "Totals" button (1).

   The "Totals" menu page will appear.

2. Press "Trip B".

   "Trip B" will highlight in blue and the "Trip B" page will appear showing the machine "Trip B" information.

   Note: The "Reset" button (3) appears on the right side of the "Trip B" Totals page. Press the "Reset" button (3) to clear "Trip B" Totals. The "Trip B" page will appear showing "Confirm Reset?".

   Show/hide table

   Illustration 8	g06131058
   (2) Back button

3. Press OK to confirm Trip B Reset.

4. Press the Back button (2) to return to the previous menu.

Note: When third-party payload is used Trip A, Trip B, and Material Totals will not be available.

Material Totals

Path: Totals > Material

The Material Totals are incremented only when payload data is stored either through a manual store button press or through auto-store.

Illustration 9	g06129676
(3) Reset button

1. Press the "Totals" button (1).

   The "Totals" menu page will appear.

2. Press the "Material" button.

   "Material" will highlight in blue and the "Material" page will appear (with the machine calculated Material Totals).

   The "Reset" button (3) appears on the right side of the "Material" Totals page. Press "Reset" button (3) to clear the currently selected "Material" Total.

   Show/hide table

   Illustration 10	g06128037
   (2) Back button

3. Press OK to confirm Material Reset.

4. Press the Back button (2) to return to the previous menu.

   Note: The double arrow buttons at the top of the screen are a “page up” and “page down” to advance to the next page of materials.

Note: When third-party payload is used Trip A, Trip B, and Material Totals will not be available.