994K Wheel Loader Systems Caterpillar


Fixed Axle (Front)

Usage:

994K MM9


Illustration 1g03892251

Table 1
Specification for 389-4676 Fixed Axle Gp 
Item  Qty  Part  Specification Description 
9F-2167 Purge Screw  Torque to 11 ± 4 N·m (97 ± 35 lb in)
110-2446 Adapter  Torque to 70 ± 7 N·m (52 ± 5 lb ft)
3K-0360 O-Ring Seal  Lubricate the seal lightly with the lubricant that is being sealed. 
90  7X-2585 Bolt  Use the following procedure to tighten the bolts:

1. Torque to 1400 ± 175 N·m (1033 ± 129 lb ft) in an alternating sequence.
2. Then turn each bolt by an additional 120 ± 10 degrees in an alternating sequence.
3. The bolts should not be reused after the bolts have been tightened to the recommended torque. 
9M-5892 O-Ring Seal  Lubricate the seal lightly with the lubricant that is being sealed. 
6V-3298 Magnetic Plug  Torque to 210 ± 20 N·m (155 ± 15 lb ft)
2S-4078 O-Ring Seal  Lubricate the seal lightly with the lubricant that is being sealed. 
173-0562 Drain Assembly  Torque to 230 ± 15 N·m (170 ± 11 lb ft).
Tighten the plug to 80 ± 7 N·m (59 ± 5 lb ft).
A pipe with a 1 inch diameter is needed to activate the valve for draining. 
6V-7660 O-Ring Seal  Lubricate the seal lightly with the lubricant that is being sealed. 
10  164-4180 Plug As  Before assembly, lubricate the seal lightly with the lubricant that is being sealed.
Torque to 210 ± 20 N·m (155 ± 15 lb ft)

Caterpillar Information System:

994K Wheel Loader Systems Oscillating Axle (Rear)
994K Wheel Loader Systems Piston Pump (Implement Pilot) (Axle Oil Cooler)
994K Wheel Loader Systems Differential
994K Wheel Loader Systems Pressure Reducing Valve
994K Wheel Loader Systems Fuel Filter and Water Separator
Procedure to Install Fleet for Underground on R1600H Load Haul Dump Machines fitted with Command for Underground {7490} Procedure to Install Fleet for Underground on R1600H Load Haul Dump Machines fitted with Command for Underground {7490}
Procedure to Install Fleet for Underground on R1600G Load Haul Dump Machines fitted with Command for Underground {7490} Procedure to Install Fleet for Underground on R1600G Load Haul Dump Machines fitted with Command for Underground {7490}
R1700 Load Haul Dump Engine Lockout Switch
R1700 Load Haul Dump Engine Shutdown Switch
CP56B, CP68B, CS56B, CS66B and CS68B Vibratory Soil Compactors Machine Systems Hydraulic System Components
CP56B, CP68B, CS56B, CS66B and CS68B Vibratory Soil Compactors Machine Systems Hydraulic Schematic (Vibratory System)
CP56B, CP68B, CS56B, CS66B and CS68B Vibratory Soil Compactors Machine Systems Electrical Schematic (Vibratory System)
994K Wheel Loader Systems Linkage Pin and Seal Group (Bucket Control)
994K Wheel Loader Systems Relief Valve (Brake Accumulator)
Air Conditioning Compressor Pressure Switch Is Not Working On Certain Series C Articulated Trucks {1408} Air Conditioning Compressor Pressure Switch Is Not Working On Certain Series C Articulated Trucks {1408}
Camshaft Thrust Washer Torque on C175-20 Off-Highway Truck Engines {1210} Camshaft Thrust Washer Torque on C175-20 Off-Highway Truck Engines {1210}
AP300F Asphalt Paver Propel System Relief Valve (Main) - Test and Adjust - Right Pump
PL72 Pipelayer Systems Pivot Shaft
Medium L and M Series Wheel Loaders Cat Production Measurement Application on Machines Equipped with Product Link: PLE631 or PLE641 Menu Navigation
Medium L and M Series Wheel Loaders Cat Production Measurement Application on Machines Equipped with Product Link: PLE631 or PLE641 Reweigh Operation
Medium L and M Series Wheel Loaders Cat Production Measurement Application on Machines Equipped with Product Link: PLE631 or PLE641 Service Menu
Medium L and M Series Wheel Loaders Cat Production Measurement Application on Machines Equipped with Product Link: PLE631 or PLE641 Totals Menu
Medium L and M Series Wheel Loaders Cat Production Measurement Application on Machines Equipped with Product Link: PLE631 or PLE641 Payload Menu
Medium L and M Series Wheel Loaders Cat Production Measurement Application on Machines Equipped with Product Link: PLE631 or PLE641 Zero Operation
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.