Pivot Shaft
Show/hide table
 | |
| Illustration 1 | g03892460 |
(1) Machine main frame (2) Track roller frame (3) Bearing (4) Plate (5) Bolts (6) Pivot shaft | |
Pivot shaft (6) connects the main frame (1) with the track roller frames (2) .
The pivot shaft consists of two shafts that are bolted to the main frame. The shafts extend through the track roller frames at the rear of the tractor.
The pivot shaft is supported by the track roller frames on bearings (3). The track roller frames are filled with oil which lubricates the pivot shaft bearings. Plate (4) and bolts (5) retain the track roller frames on the pivot shaft.
Caterpillar Information System:
AP300F Asphalt Paver Propel System Relief Valve (Main) - Test and Adjust - Right Pump
Camshaft Thrust Washer Torque on C175-20 Off-Highway Truck Engines {1210} Camshaft Thrust Washer Torque on C175-20 Off-Highway Truck Engines {1210}
Air Conditioning Compressor Pressure Switch Is Not Working On Certain Series C Articulated Trucks {1408} Air Conditioning Compressor Pressure Switch Is Not Working On Certain Series C Articulated Trucks {1408}
994K Wheel Loader Systems Relief Valve (Brake Accumulator)
994K Wheel Loader Systems Linkage Pin and Seal Group (Bucket Control)
994K Wheel Loader Systems Fixed Axle (Front)
994K Wheel Loader Systems Oscillating Axle (Rear)
994K Wheel Loader Systems Piston Pump (Implement Pilot) (Axle Oil Cooler)
994K Wheel Loader Systems Differential
994K Wheel Loader Systems Pressure Reducing Valve
994K Wheel Loader Systems Fuel Filter and Water Separator
Procedure to Install Fleet for Underground on R1600H Load Haul Dump Machines fitted with Command for Underground {7490} Procedure to Install Fleet for Underground on R1600H Load Haul Dump Machines fitted with Command for Underground {7490}
Medium L and M Series Wheel Loaders Cat Production Measurement Application on Machines Equipped with Product Link: PLE631 or PLE641 Menu Navigation
Medium L and M Series Wheel Loaders Cat Production Measurement Application on Machines Equipped with Product Link: PLE631 or PLE641 Reweigh Operation
Medium L and M Series Wheel Loaders Cat Production Measurement Application on Machines Equipped with Product Link: PLE631 or PLE641 Service Menu
Medium L and M Series Wheel Loaders Cat Production Measurement Application on Machines Equipped with Product Link: PLE631 or PLE641 Totals Menu
Medium L and M Series Wheel Loaders Cat Production Measurement Application on Machines Equipped with Product Link: PLE631 or PLE641 Payload Menu
Medium L and M Series Wheel Loaders Cat Production Measurement Application on Machines Equipped with Product Link: PLE631 or PLE641 Zero Operation
CP56B, CP68B, CS56B, CS66B and CS68B Vibratory Soil Compactors Machine Systems Location of Components (Fan Drive Hydraulic System)
CP56B, CP68B, CS56B, CS66B and CS68B Vibratory Soil Compactors Machine Systems Electrical Schematic (Hydraulic Fan)
PM620, PM622, PM820, PM822 and PM825 Cold Planers Electronic System General Information
CB64B, CB66B and CB68B Asphalt Compactors Propel System General Information (Propel System)
CB64B, CB66B and CB68B Asphalt Compactors Propel System Operator Controls (Propel System)
CB64B, CB66B and CB68B Asphalt Compactors Propel System Location of Electrical Components (Propel System)