C32 Marine Engines Caterpillar


Auxiliary Water Pump - Disassemble

Usage:

C32 DSJ

Disassembly Procedure

Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     185-3630     Strap Wrench As     1    
B     8H-0663     Bearing Puller Gp     1    

Start By:

  1. Remove auxiliary water pump.



    Illustration 1g03762436



    Illustration 2g03762479



    Illustration 3g03762497

  1. Remove bolts (1), cover (2), and the shims. Remove port plate (3) from cover (2). Remove O-ring seals (4) .



    Illustration 4g03772771



    Illustration 5g03762516

  1. Place a mark on the bearing housing and the impeller housing to show orientation. Remove bolts (5) and the shims if present. Using a suitable press, remove shaft and bearing housing assembly (7) from impeller housing (6) .



    Illustration 6g03762576

  1. Using Tooling (A), remove bolt (8) and gear (9) .



    Illustration 7g03762578



    Illustration 8g03762597

  1. Remove retaining rings (10) and (11). Position the shaft and bearing housing assembly in a suitable press and remove shaft and bearing assembly (12) from bearing housing (13) .

    Note: The inner race of the lower bearing will remain on the shaft when the shaft is removed from the bearing housing. The outer race and roller assembly will remain inside of the bearing housing. This is normal per the bearing design.




    Illustration 9g03762617

  1. Using a suitable press, remove shaft (15) from bearing (14) .

  1. Using Tooling (B) and suitable press, remove lower bearing inner race (16) from shaft (15) .



    Illustration 10g03764596

  1. Remove seal collar (17) and O-ring seal (18) .



    Illustration 11g03764616

  1. Using a suitable press, remove bearing race and roller assembly (19) from the bearing housing.

  1. Remove lip seal (20) .



    Illustration 12g03764639

  1. Remove drain plug (26) and the O-ring seal. Remove impeller (21), port plates (22) and (23), impeller (24), and port plate (25) from impeller housing (6) .



    Illustration 13g03764640

  1. Remove tube (27) and the O-ring seal (not shown). Remove seal and spring assembly (28) .



    Illustration 14g03764716

  1. Remove ceramic seal (29) .

Caterpillar Information System:

C15 and C18 Engines Maintenance Interval Schedule - C18 Engines With Ratings Greater Than 760 HP
C15 and C18 Engines Maintenance Interval Schedule - C18 Engines
C15 and C18 Engines Maintenance Interval Schedule - C15 Engines
C15 and C18 Engines Maintenance Interval Schedule - C15 Engines With Ratings Greater Than 579 hp
C13 Generator Set Engine Engine Oil Pump - Remove and Install
G3600 A4 Engines Electrohydraulic System Oil Filter - Change
G3600 A4 Engines Electrohydraulic System Oil - Change
C13 Generator Set Engine Engine Oil Cooler - Remove and Install
G3600 A4 Engines Electrohydraulic System - Inspect
G3600 A4 Engines Electrohydraulic Actuator - Recondition
G3600 A4 Engines Engine Operation
G3600 A4 Engines Configuration Parameters
C7.1 Engines DEF Pressure Is Low
2014/11/26 New Electrical Schematic Is Available for Certain Retrofit Aftertreatment Selective Catalytic Reduction Systems {108F, 1091, 7566}
2015/02/27 A New Procedure Exists for Marking Diesel Particulate Filters that Are Being Returned to Cat ® Reman {108F, 7754}
2015/01/16 A New Air Starter Service Kit and Strainer Are Used on the Air Starting Systems of Certain C27, C32, 3512, and 3516C Engines {1451}
C13 Generator Set Engine Water Pump - Remove and Install
3512E Land Electric Drive Manual Stop Procedure
NEHS1214: 455-0126 Nitrogen Booster Pump Group {0374, 0599, 0647, 0756, 4263, 4331, 5077, 7200} NEHS1214: 455-0126 Nitrogen Booster Pump Group {0374, 0599, 0647, 0756, 4263, 4331, 5077, 7200}
C32 Marine Engines Auxiliary Water Pump - Assemble
C3.4B Engines Exhaust Has Excessive White Smoke
C3.4B Engines Exhaust System Contains Coolant
2015/04/17 New Air Shutoff Assemblies Are Used On Certain C175 Engines {1078}
C7.1 Engines DEF Tank Level Is Low
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.