C13 Generator Set Engine Caterpillar


Water Pump - Remove and Install

Usage:

C13 XQ375 X3F

Removal Procedure

Table 1
Required Tools 
Tool  Part Number  Part Description  Qty 
207-1601  Rubber Lubricant 

  1. Drain the coolant. Refer to Operation and Maintenance Manual, "Cooling System Coolant (ELC) - Change" for the correct draining and filling procedures.


    Illustration 1g03764696

  2. Loosen clamps (2) and remove hose (3). Remove tube assembly (1).


    Illustration 2g03764737

  3. Remove bolts (4) and temperature regulator housing (5).

  4. Remove tube assembly (6).


    Illustration 3g03764798

  5. Disconnect hose assembly (7), hose assembly (8), and hose assembly (9).

  6. Loosen clamps (10). Remove hose (11).


    Illustration 4g03764886

  7. Loosen clamps (12) and remove hose (13).

  8. Remove bolts (15) and elbow (14).

  9. Remove bolts (17) and position hose assemblies (17) out of the way.


    Illustration 5g03765518

  10. Remove bolts (18), bolts (20), bolts (21), bolts (22), and guard assembly (19).


    Illustration 6g03765599

  11. Remove bolts (23) and water pump elbow (24).

  12. Remove bolts (26) and water pump (25).


    Illustration 7g03765779

  13. Remove O-ring seal (27) from water pump (25).


    Illustration 8g03765816

  14. Remove seal (29).

  15. Remove bolts (28) and inlet cover (30).


    Illustration 9g03765917

  16. Remove O-ring seal (31) from inlet cover (30).

Installation Procedure

  1. Install water pump (25) in the reverse order of removal.

    1. Apply Tooling (A) to all O-ring seals and seals in the installation procedure.

    2. Install clamp (12) and tighten clamp (12) to a torque of 14 ± 1 N·m (124 ± 9 lb in).

Caterpillar Information System:

2015/01/16 A New Air Starter Service Kit and Strainer Are Used on the Air Starting Systems of Certain C27, C32, 3512, and 3516C Engines {1451}
2015/02/27 A New Procedure Exists for Marking Diesel Particulate Filters that Are Being Returned to Cat ® Reman {108F, 7754}
2014/11/26 New Electrical Schematic Is Available for Certain Retrofit Aftertreatment Selective Catalytic Reduction Systems {108F, 1091, 7566}
C7.1 Engines DEF Pressure Is Low
C32 Marine Engines Auxiliary Water Pump - Disassemble
C15 and C18 Engines Maintenance Interval Schedule - C18 Engines With Ratings Greater Than 760 HP
C15 and C18 Engines Maintenance Interval Schedule - C18 Engines
C15 and C18 Engines Maintenance Interval Schedule - C15 Engines
C15 and C18 Engines Maintenance Interval Schedule - C15 Engines With Ratings Greater Than 579 hp
C13 Generator Set Engine Engine Oil Pump - Remove and Install
G3600 A4 Engines Electrohydraulic System Oil Filter - Change
G3600 A4 Engines Electrohydraulic System Oil - Change
3512E Land Electric Drive Manual Stop Procedure
NEHS1214: 455-0126 Nitrogen Booster Pump Group {0374, 0599, 0647, 0756, 4263, 4331, 5077, 7200} NEHS1214: 455-0126 Nitrogen Booster Pump Group {0374, 0599, 0647, 0756, 4263, 4331, 5077, 7200}
C32 Marine Engines Auxiliary Water Pump - Assemble
C3.4B Engines Exhaust Has Excessive White Smoke
C3.4B Engines Exhaust System Contains Coolant
2015/04/17 New Air Shutoff Assemblies Are Used On Certain C175 Engines {1078}
C7.1 Engines DEF Tank Level Is Low
G3600 A4 Engines Product Description
C13 Generator Set Engine Water Temperature Regulator Housing - Remove and Install
C13 Generator Set Engine Fumes Disposal Filter - Remove and Install
C7.1 Engines DEF Tank Temperature Is High
C7.1 Engines DEF Temperature Is Low
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.