C13 Generator Set Engine Caterpillar


Water Temperature Regulator Housing - Remove and Install

Usage:

C13 XQ375 X3F

Removal Procedure

Table 1
Required Tools 
Tool  Part Number  Part Description  Qty 
207-1601  Rubber Lubricant 

  1. Drain the coolant. Refer to Operation and Maintenance Manual, "Cooling System Coolant (ELC) - Change" for the correct draining and filling procedures.


    Illustration 1g03764696

  2. Loosen clamps (2) and remove hose (3). Remove tube assembly (1).


    Illustration 2g03766477

  3. Remove bolts (4) and temperature regulator housing (5).


    Illustration 3g03766517

  4. Remove water temperature regulators (6) and seal (8) from temperature regulator housing (5).

  5. Clean any lubricant from bore (7).


    Illustration 4g03766546

    Note: Note the orientation of the lip seals for installation purposes.

  6. Remove lip seals (8).

Installation Procedure

  1. Install water temperature regulator housing (5) in the reverse order of removal.

    1. Apply a thin layer of Tooling (A) to lip seals (8) and to bore (7).

Caterpillar Information System:

G3600 A4 Engines Product Description
C7.1 Engines DEF Tank Level Is Low
2015/04/17 New Air Shutoff Assemblies Are Used On Certain C175 Engines {1078}
C3.4B Engines Exhaust System Contains Coolant
C3.4B Engines Exhaust Has Excessive White Smoke
C32 Marine Engines Auxiliary Water Pump - Assemble
NEHS1214: 455-0126 Nitrogen Booster Pump Group {0374, 0599, 0647, 0756, 4263, 4331, 5077, 7200} NEHS1214: 455-0126 Nitrogen Booster Pump Group {0374, 0599, 0647, 0756, 4263, 4331, 5077, 7200}
3512E Land Electric Drive Manual Stop Procedure
C13 Generator Set Engine Water Pump - Remove and Install
2015/01/16 A New Air Starter Service Kit and Strainer Are Used on the Air Starting Systems of Certain C27, C32, 3512, and 3516C Engines {1451}
2015/02/27 A New Procedure Exists for Marking Diesel Particulate Filters that Are Being Returned to Cat ® Reman {108F, 7754}
2014/11/26 New Electrical Schematic Is Available for Certain Retrofit Aftertreatment Selective Catalytic Reduction Systems {108F, 1091, 7566}
C13 Generator Set Engine Fumes Disposal Filter - Remove and Install
C7.1 Engines DEF Tank Temperature Is High
C7.1 Engines DEF Temperature Is Low
C13 Generator Set Engine Valve Mechanism Cover - Remove and Install
C3.4B Engines Data Link - Test
2014/12/12 Engine Overhaul Foundational Kits Are Available for C18 Marine Engines {1000}
XQC1600 Power Module Fuel System Primary Filter/Water Separator - Drain
XQC1600 Power Module Welding on Engines with Electronic Controls
Modification to Control Panel Supply Wiring on Certain C6.6 Marine Generator Sets{1408, 4490, 7451} Modification to Control Panel Supply Wiring on Certain C6.6 Marine Generator Sets{1408, 4490, 7451}
C7.1 Engines Engine Cranks but Does Not Start
C4.4 and C7.1 Engines Engine Does Not Crank
C4.4 and C7.1 Engines Engine Has Early Wear
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.