Fuel Priming Pump and Primary Fuel Filter
Show/hide table
 | |
| 图 1 | g03654037 |
Show/hide table
| 361-5084 燃油注油泵总成 的技术规格 | |||
| 项目 | 数量 | 零件 | 技术规格说明 |
| 1 | 1 | - | 将螺母拧紧至扭矩为 6.5 ± 0.5 N·m (57.5 ± 4.4 lb in)。 |
| 2 | 1 | - | 将阀体芯拧紧至扭矩为 28 ± 3 N·m (248 ± 27 lb in)。 |
| 3 | 2 | 179-7267 塞 (1) | 拧紧至扭矩为 95 ± 10 N·m (70 ± 7 lb ft)。 |
| 4 | 1 | 9S-8002 O 形密封圈塞 | 拧紧至扭矩为 11 ± 2 N·m (97 ± 18 lb in)。 |
| 5 | 1 | 445-9452 单向阀总成 | 拧紧至扭矩为 34.0 ± 1.4 N·m (300.9 ± 12.4 lb in)。 |
| 6 | 1 | 9S-4167 空心螺柱 | 涂覆红色 Loctite 263，长度 (E) 为 11.0 ± 0.5 mm (0.43 ± 0.02 in)，如图 1 所示。 注：仅在欧洲使用红色 Loctite 270。 拧紧至扭矩为 70 ± 15 N·m (52 ± 11 lb ft)。 |
| 7 | 1 | 328-8351 接头 (1) | 拧紧至扭矩为 13.5 ± 0.5 N·m (119.5 ± 4.4 lb in)。 |
| 8 | 2 | 6D-5801 锁紧螺母 | 拧紧至扭矩为 1.7 ± 0.4 N·m (15.0 ± 3.5 lb in)。 |
Show/hide table
| ( 1 ) | 不单独维修的零件。 |
Caterpillar Information System:
C13, C15, and C18 Tier 4 Final Engines Exhaust Manifold
C13, C15, and C18 Tier 4 Final Engines Exhaust Lines
390F Excavator Machine System Grease Lines
C4.4 Marine Generator Set Heat Exchanger
C13, C15, and C18 Tier 4 Final Engines Diesel Particulate Filter
C13, C15, and C18 Tier 4 Final Engines Exhaust Cooler (NRS)
C4.4 Marine Generator Set Turbocharger
C13, C15, and C18 Tier 4 Final Engines Mounting Frame
C4.4 Marine Generator Set Starting the Engine
C13, C15, and C18 Tier 4 Final Engines Mounting Frame
C13, C15, and C18 Tier 4 Final Engines Mounting Frame
C13, C15, and C18 Tier 4 Final Engines Diesel Exhaust Fluid Tank
C13, C15, and C18 Tier 4 Final Engines Exhaust Manifold
374F Excavator Machine System Control Valve
C13, C15, and C18 Tier 4 Final Engines Exhaust Manifold
C4.4 Marine Generator Set Control Panel Mounting
C4.4 Marine Generator Set Voltage Regulators - R438 Automatic Voltage Regulation AVR
390F Excavator Machine Systems Pump Drive Coupling - Remove and Install
G3306B Generator Sets Alarms and Shutoffs
390F Excavator Machine Systems Pilot Valve (Travel) - Remove and Install
C15 Industrial Engines Maintenance Interval Schedule - Engines Which Have Shallow Sumps
C15 Industrial Engines Maintenance Interval Schedule - Engines Which Have Deep Sumps
3512C HD and 3516C HD IPP Rental Power Modules Speed Control - Test
390F Excavator Machine System Swing Drive Mounting