Engine Oil Pump - Remove
Show/hide table
NOTICE |
---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products. Dispose of all fluids according to local regulations and mandates. |
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Disconnect tube assembly (1) and tube assembly (2).
- Remove bolts (5).
- Remove bolts (4).
- Remove engine oil pump (3).
Show/hide table
Illustration 1 | g01010793 |
Caterpillar Information System:
C13 Engine Engine Oil Cooler - Install
C13 Engine Engine Oil Cooler - Remove
C13 Engine Engine Oil Filter Base - Install
C13 Engine Engine Oil Filter Base - Assemble
C13 Engine Engine Oil Filter Base - Disassemble
C13 Engine Engine Oil Filter Base - Remove
C13 Engine Inlet and Exhaust Valve Seat Inserts - Remove and Install
C13 Engine Inlet and Exhaust Valve Guides - Remove and Install
C13 Engine Inlet and Exhaust Valves - Remove and Install
C13 Engine Inlet and Exhaust Valve Springs - Remove and Install
C9 On-highway Engine Diesel Particulate Filter Temperature and Pressure Sensor
PM3516 Power Modules Fumes Disposal Filter Element - Replace
C13 Engine Engine Oil Pump - Disassemble
C13 Engine Engine Oil Pump - Assemble
C13 Engine Engine Oil Pump - Install
C15 and C18 Engines for Caterpillar Built Machines Turbocharger
3512C Engine for 785D Off-Highway Truck/Tractors Piston and Rings
C13 Engine Water Pump - Remove
C13 Engine Water Pump - Install
C13 Engine Water Temperature Regulator - Remove and Install
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562} Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
C13 Engine Flywheel - Remove
C13 Engine Flywheel - Install
C13 Engine Flywheel Housing - Remove and Install