Power Train Guard (Transmission) - Remove and Install
拆卸步骤
Show/hide table
所需工具     | |||
---|---|---|---|
工具     | 零件号     | 零件描述     | 数量     |
A     | 5P-3050     | 地面千斤顶     | 1     |
- 如图所示,将工具 (A) 安置在防护罩组件 (1) 的下面。 防护罩组件 (1) 的重量约为 215 kg (475 lb)。
Show/hide table
图 1 | g01289518 |
- 拆下螺栓 (2) 。
- 卸下支架 (3) ,使用工具 (A) 将防护罩组件 (1) 降到地面。
Show/hide table
图 2 | g01289519 |
安装步骤
Show/hide table
所需工具     | |||
---|---|---|---|
工具     | 零件号     | 零件描述     | 数量     |
A     | 5P-3050     | 地面千斤顶     | 1     |
- 使用工具 (A) ,提升防护罩组件 (1) 到位。 防护罩组件 (1) 的重量约为 215 kg (475 lb)。
Show/hide table
图 3 | g01289519 |
- 安装支架 (3) 。
- 安装螺栓 (2) ,从防护罩组件 (1) 上卸下工具 (A) 。
Show/hide table
图 4 | g01289518 |
Caterpillar Information System:
2006/07/31 Bearing Inserts Are Now Used in Frame Steering Bracket {7051, 7073}
Underground Articulated Trucks Truck Payload Measurement System Service Tools
D7G Series 2 and D7G Series II Track-Type Tractors Condenser (Refrigerant) - Clean
D7G Series 2 and D7G Series II Track-Type Tractors Emissions Certification Film
D7G Series 2 and D7G Series II Track-Type Tractors Fuel Tank Cap and Strainer - Clean
Installation Instructions for the 291-1184 Secondary Steering Group (Kit) {4300} Installation Instructions for the 291-1184 Secondary Steering Group (Kit) {4300}
657G Wheel Tractor-Scraper Wheel Tractor Power Train Power Train Guard (Transmission) - Remove and Install
953D Track-Type Loader Machine Systems Cab - Install
953D Track-Type Loader Machine Systems Cab - Remove
D7G Series 2 and D7G Series II Track-Type Tractors Fuel Tank Water and Sediment - Drain
814F Series 2 Wheel Dozer, 815F Series 2 Soil Compactor and 816F Series 2 Landfill Compactor Braking System Brake Accumulator
657G Wheel Tractor-Scraper Wheel Tractor Power Train Transmission Hydraulic Control - Install
D6K Track-Type Tractor Electrohydraulic Power Train Track Roller
657G Wheel Scraper Power Train Final Drive and Wheel - Remove
657G Wheel Scraper Power Train Final Drive and Wheel - Install
D11R Starter Solenoid Connections{1467} D11R Starter Solenoid Connections{1467}
Load Haul Dump Machine Machining & Welding Information Consumables
Machining and Welding Information for Underground Articulated Trucks Rear Frame
Machining and Welding Information for Underground Articulated Trucks Front Frame
953D Track-Type Loader Machine Systems Lift Cylinder - Remove and Install
953D Track-Type Loader Machine Systems Piston Pump (Implement) - Remove
953D Track-Type Loader Machine Systems Piston Pump (Implement) - Install
953D Track-Type Loader Machine Systems Fan and Gear Motor (Hydraulic Fan) - Remove
D7G Series 2 and D7G Series II Track-Type Tractors Cutting Edges and End Bits - Inspect/Replace