| Required Tools | |||
| Tool | Part Number | Part Description | Qty |
| A | 185-3630 | Strap Wrench As | 1 |
| NOTICE |
|---|
|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products. Dispose of all fluids according to local regulations and mandates. |
 |
|
Fuel leaked or spilled onto hot surfaces or electrical components can cause a fire. To help prevent possible injury, turn the start switch off when changing fuel filters or water separator elements. Clean up fuel spills immediately. |
- Use Tooling (A) to remove fuel filters (1) from fuel filter base (2).
Show/hide table
Illustration 2 g01166904 - Disconnect hose assemblies (3) from the manifold on fuel filter base (2).
Show/hide table
Illustration 3 g01166905 - Disconnect hose assemblies (4), (5), and (6) from fuel filter base (2).
- Remove three bolts (7) and fuel filter base (2).
| |
| Illustration 1 | g01166895 |
| Required Tools | |||
| Tool | Part Number | Part Description | Qty |
| A | 185-3630 | Strap Wrench As | 1 |
- Position fuel filter base (2) on the engine. Install three bolts (7).
- Connect hose assemblies (6), (5), and (4) to fuel filter base (2).
Show/hide table
Illustration 5 g01166904 - Connect hose assemblies (3) to the manifold on fuel filter base (2).
Show/hide table
Illustration 6 g01166895 - Use Tooling (A) to install fuel filters (1) on fuel filter base (2).
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
| |
| Illustration 4 | g01166905 |