Hydraulic Rotator - Install - Standard Rotation Grapple
Installation Procedure
- Install grapple rotator (6), four bolts (5), and the washers in the grapple.
Show/hide table
 | |
| Illustration 1 | g00718119 |
Show/hide table
 | |
| Illustration 2 | g00718121 |
- Connect hoses (3) and (4) .
Show/hide table
 | |
| Illustration 3 | g00718118 |
- Install cover (2), four bolts (1), and the washers.
Show/hide table
 | |
| Illustration 4 | g00718117 |
End By: Separate the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Separate and Connect" for the machine that is being serviced.
Caterpillar Information System:
525B and 535B Wheel Skidders Machine Systems Hydraulic Rotator - Remove - Standard Rotation Grapple
2004/05/17 Special Instruction, REHS2154, "Procedure To Replace The Enclosure Brackets On A 973C Track-Type Loader" is Now Available {7263}
C175-16 Locomotive Engine Cooling System Coolant Extender (ELC) - Add
906 and 908 Wheel Loaders Hydraulic and Steering System Pilot Hydraulic System
D10T Track-Type Tractor Power Train Torque Divider
3408E and 3412E Engines for Caterpillar Built Machines Vibration Damper
D10R Track-Type Tractor Maintenance Interval Schedule
826K Landfill Compactor Emissions Warranty Information
950G Series II Wheel Loader Piston Pump
950G Series II Wheel Loader Vane Pump
950G Series II Wheel Loader Gear Pump
950G Series II Wheel Loader Pump Displacement
992G Wheel Loader Electrohydraulic System Electrical System Schematic
C15 and C18 Engines for Caterpillar Built Machines Vibration Damper - Check
SCJ and 8SC Series Alternators Diode Assembly - Test
992G Wheel Loader Electrohydraulic System Lift and Tilt Cylinder Drift (VIMS) - Check
SCJ and 8SC Series Alternators Regulator - Test
AccuGrade Laser System CB 1 Set Limits Fault
992K Wheel Loader and 854K Wheel Dozer Braking System Pressure Sensor (Service Brake Oil)
914G and 914G2 Compact Wheel Loaders and IT14G and IT14G2 Integrated Toolcarriers Machine Systems Cab - Remove
914G and 914G2 Compact Wheel Loaders and IT14G and IT14G2 Integrated Toolcarriers Machine Systems Cab - Install
SCJ and 8SC Series Alternators Residual Magnetism - Restore
SCJ and 8SC Series Alternators Brush Assembly - Test
SCJ and 8SC Series Alternators Brush Length - Check