Pressure Sensor (Service Brake Oil)
Show/hide table
Illustration 1 | g01439328 |
(1) Final installation torque for the pressure sensor group ... 10 ± 2 N·m (90 ± 18 lb in)
Maximum absolute pressure ... 5701 kPa (825 psi)
Operating voltage ... 8.0 ± 0.5 VDC
Operating temperature ... -40 to 125 °C (-40 to 257 °F)
Maximum supply current ... 20 mA
Maximum current draw ... 15 mA
Output frequency ... 500 ± 150 Hz
Duty cycle ... 5 to 90 %
Caterpillar Information System:
AccuGrade Laser System CB 1 Set Limits Fault
SCJ and 8SC Series Alternators Regulator - Test
992G Wheel Loader Electrohydraulic System Lift and Tilt Cylinder Drift (VIMS) - Check
SCJ and 8SC Series Alternators Diode Assembly - Test
C15 and C18 Engines for Caterpillar Built Machines Vibration Damper - Check
992G Wheel Loader Electrohydraulic System Electrical System Schematic
525B and 535B Wheel Skidders Machine Systems Hydraulic Rotator - Install - Standard Rotation Grapple
525B and 535B Wheel Skidders Machine Systems Hydraulic Rotator - Remove - Standard Rotation Grapple
2004/05/17 Special Instruction, REHS2154, "Procedure To Replace The Enclosure Brackets On A 973C Track-Type Loader" is Now Available {7263}
C175-16 Locomotive Engine Cooling System Coolant Extender (ELC) - Add
906 and 908 Wheel Loaders Hydraulic and Steering System Pilot Hydraulic System
D10T Track-Type Tractor Power Train Torque Divider
914G and 914G2 Compact Wheel Loaders and IT14G and IT14G2 Integrated Toolcarriers Machine Systems Cab - Remove
914G and 914G2 Compact Wheel Loaders and IT14G and IT14G2 Integrated Toolcarriers Machine Systems Cab - Install
SCJ and 8SC Series Alternators Residual Magnetism - Restore
SCJ and 8SC Series Alternators Brush Assembly - Test
SCJ and 8SC Series Alternators Brush Length - Check
C11 and C13 Engines Cylinder Head Valves
D10T Track-Type Tractor Indicators and Gauges - Test
AccuGrade Laser System CB 2 Lost Beam
AccuGrade Laser System CB 3 Calibration Failure
D3G, D4G and D5G Track-Type Tractors AccuGrade Laser CB 6 Wrong Blade Motion
AccuGrade Laser System CB 8 No Blade Movement
2004/04/19 Correction to Systems Operation Testing and Adjusting, "Control Valve (Hoist)" {5051, 5136}