Brush Length - Check
Show/hide table
Illustration 1 | g01066154 |
- Measure the length of brushes (14) and (15) on the longest side. The length should be as follows:
New length ... 14 mm (0.55 inch)
Minimum length ... 5.33 mm (0.21 inch)
- If the brushes are worn near or below the minimum length, replace the brush assembly.
Caterpillar Information System:
SCJ and 8SC Series Alternators Brush Assembly - Test
SCJ and 8SC Series Alternators Residual Magnetism - Restore
914G and 914G2 Compact Wheel Loaders and IT14G and IT14G2 Integrated Toolcarriers Machine Systems Cab - Install
914G and 914G2 Compact Wheel Loaders and IT14G and IT14G2 Integrated Toolcarriers Machine Systems Cab - Remove
992K Wheel Loader and 854K Wheel Dozer Braking System Pressure Sensor (Service Brake Oil)
AccuGrade Laser System CB 1 Set Limits Fault
SCJ and 8SC Series Alternators Regulator - Test
992G Wheel Loader Electrohydraulic System Lift and Tilt Cylinder Drift (VIMS) - Check
SCJ and 8SC Series Alternators Diode Assembly - Test
C15 and C18 Engines for Caterpillar Built Machines Vibration Damper - Check
992G Wheel Loader Electrohydraulic System Electrical System Schematic
525B and 535B Wheel Skidders Machine Systems Hydraulic Rotator - Install - Standard Rotation Grapple
C11 and C13 Engines Cylinder Head Valves
D10T Track-Type Tractor Indicators and Gauges - Test
AccuGrade Laser System CB 2 Lost Beam
AccuGrade Laser System CB 3 Calibration Failure
D3G, D4G and D5G Track-Type Tractors AccuGrade Laser CB 6 Wrong Blade Motion
AccuGrade Laser System CB 8 No Blade Movement
2004/04/19 Correction to Systems Operation Testing and Adjusting, "Control Valve (Hoist)" {5051, 5136}
Procedure To Replace The Brackets For The Enclosure On A 973C Track-Type Loader{7257, 7263} Procedure To Replace The Brackets For The Enclosure On A 973C Track-Type Loader{7257, 7263}
Product Link PL-102C{7602} Product Link PL-102C{7602}
950G Series II Wheel Loader Pressure Control Valve Introduction
950G Series II Wheel Loader Relief Valve
950G Series II Wheel Loader Pressure Reducing Valve