The Piston Pin Retainer is Now Marked for Correct Orientation {1214}
- Caterpillar Products:
- 3500 Family Pumpers
- 3500 and 3500B Family Generator Sets and Power Modules with Standard Displacement
- Engine: Commercial
- 3500 and 3500B Engines with Standard Displacement
Show/hide table
Illustration 1 | g01058752 |
The 214-6073 Retainer has been marked in order to provide proper identification for orientation. The retainer is now stamped with the word "OUT" in order to identify the side of the retainer that must face outward from the piston pin and from the piston. The part number has not changed.
The former parts that were not marked were not removed from the system. If you are installing a retainer that is not marked, make sure that the retainer is oriented correctly.
After the assembly of the piston and rod, check the rotation of the pin. If the clips are not installed correctly, the pin will not rotate smoothly. Failure to check the rotation could cause a seizure of the piston.
Caterpillar Information System:
C13, C15, and C18 Tier 4 Final Engines Flywheel
3412E Petroleum Engine Engine Speed/Timing Sensor - Calibrate
3406E, C-10 and C-12 On-highway Engines Check Engine Lamp or Warning Lamp Is Malfunctioning
3412E Petroleum Engine Throttle Position Sensor Circuit - Test
3412E Petroleum Engine Injector Solenoid Circuit - Test
3412E Petroleum Engine Injection Actuation Pressure Control Valve Circuit - Test
2004/05/01 Proper Documentation of Returned Parts within the Warranty Claim {1000}
SCJ and 8SC Series Alternators General Information
2004/05/01 Provide Proper Documentation of Returned Parts within the Warranty Claim {1000}
2004/03/22 Provide Proper Documentation of Returned Parts within the Warranty Claim {1000}
C15 and C18 Industrial Engines Vibration Damper and Pulley - Remove and Install
3412E Petroleum Engine Engine Speed/Timing Sensor Circuit - Test
C-15 Petroleum Engine Engine Oil Filter Base
2004/04/01 223-9296 Alternators are Being Replaced. {1405}
SCJ and 8SC Series Alternators Alternator - Disassemble
C15 Petroleum Engines Air Compressor - Remove and Install
3406E, C-10 and C-12 On-highway Engines Cooling Fan Is Always ON
Electric Power Generation Principles General Information
C-10 and C-15 Petroleum Engines System Configuration Parameters
Electric Power Generation Principles Governor
3406E, C-10 and C-12 On-highway Engines Cruise Control, Idle, or PTO Can Not Be Set
C18 Marine Auxiliary Engines Injector Solenoid Circuit - Test
Electric Power Generation Principles Alternating Current Generator
3406E, C-10 and C-12 On-highway Engines Engine Cranks but Will Not Start