E190 Engine Overspeed Warning
Conditions Which Generate This Code:
The Electronic Control Module (ECM) detects an engine overspeed condition. Information on default settings and ranges for this event can be found in Troubleshooting, "Event Codes".
System Response:
The ECM will log the event.
- There are no performance effects.
The operator may be operating the engine incorrectly.
Test Step 1. Interview the Operator
Determine the events that caused the overspeed of the engine. Make corrections in order to prevent the overspeed from recurring.
Results:
- OK - STOP
Caterpillar Information System:
3126B Marine Engines E059 Low Engine Coolant Level Warning
G3406 and G3412 Generator Set Engines Electronic Control System Operation
C13 and C15 On-highway Engines Dyno Mode
3126B Marine Engines E057 Low Engine Coolant Level Derate
C11, C13 and C15 On-highway Engines Intake Valve Actuator Circuit - Test
G3406 and G3412 Generator Set Engines Electronic Control System Parameters - Electronic Ignition System (EIS)
2002/12/01 The Contents Of The Service Manuals For All On-Highway Truck Engines Is Available On The Caterpillar Intranet {1000}
2002/12/02 The Contents Of The Service Manuals For All Caterpillar Machines Is Available On The Caterpillar Intranet {1000}
C11 and C13 On-Highway Engines Air Inlet and Exhaust System
2002/12/01 A Revised Special Instruction Provides Information on Service Replacement of the Turbocharger (for Turbocharged Engines Only) {1052}
2002/12/01 A Revised Special Instruction Provides Information on Service Replacement of the Turbocharger (for Turbocharged Engines Only) {1052}
C7 Petroleum Engines Lubrication System
3612 and 3616 Engines Engine Support
3056E Industrial Engine Fuel Injection Lines - Remove and Install
3606 and 3608 Engines Engine Support
2003/02/01 New Heat Shields for the Indicator Valves are Now Available {1100}
G3406 and G3412 Generator Set Engines Spark Plug and Transformer - 8.5:1 and 9.7:1 Compression Ratio
3406E and C15 Marine Engines Zinc Rods - Inspect/Replace
797B Off-Highway Truck Steering System General Information
797F Off-Highway Truck Steering System Visual Inspection
3056E Industrial Engine Turbocharger - Remove
3056E Industrial Engine Turbocharger - Install
797 Off-Highway Truck Steering System Machine Preparation for Troubleshooting
UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies User Interface for Multiple Module Unit