Spark Plug and Transformer - 8.5:1 and 9.7:1 Compression Ratio
Note: For the compression ratio, refer to the engine's Information Plate.
Show/hide table
Illustration 1 | g00931150 |
(1) Ignition transformer
(2) Spark plug
- Electrode gap ... 0.457 mm (0.0180 inch)
- Torque ... 26 ± 4 N·m (19 ± 3 lb ft)
Caterpillar Information System:
2003/02/01 New Heat Shields for the Indicator Valves are Now Available {1100}
3606 and 3608 Engines Engine Support
3056E Industrial Engine Fuel Injection Lines - Remove and Install
3612 and 3616 Engines Engine Support
3126B Marine Engines E190 Engine Overspeed Warning
3126B Marine Engines E059 Low Engine Coolant Level Warning
G3406 and G3412 Generator Set Engines Electronic Control System Operation
C13 and C15 On-highway Engines Dyno Mode
3126B Marine Engines E057 Low Engine Coolant Level Derate
C11, C13 and C15 On-highway Engines Intake Valve Actuator Circuit - Test
G3406 and G3412 Generator Set Engines Electronic Control System Parameters - Electronic Ignition System (EIS)
2002/12/01 The Contents Of The Service Manuals For All On-Highway Truck Engines Is Available On The Caterpillar Intranet {1000}
3406E and C15 Marine Engines Zinc Rods - Inspect/Replace
797B Off-Highway Truck Steering System General Information
797F Off-Highway Truck Steering System Visual Inspection
3056E Industrial Engine Turbocharger - Remove
3056E Industrial Engine Turbocharger - Install
797 Off-Highway Truck Steering System Machine Preparation for Troubleshooting
UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies User Interface for Multiple Module Unit
UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies User Interface for System Cabinet
C11, C13 and C15 On-highway Engines Cooling Fan Is Always ON
3126B Marine Engines E096 High Fuel Pressure
3056E Industrial Engine Camshaft Gear - Remove and Install
G3304B and G3306B Engines Engine Oil Filter Base