Wiring Harness (Open Circuit) - Test
断路是指使电流不流动的电路故障。 断路通常是由电气导线故障或电气接头连接不良引起的。 电气导线或连接断开时,电路中的电流就会中断流动。 常闭电路的电阻值应小于 5 欧姆。 下述步骤将说明断路测试:
参考有关完整的电气示意图,请参阅正在维修的机器的电气系统示意图。
测试有无断路。
- 确定可疑电路中的接头和导线编号。 使用机器的电气系统示意图检查电路。
- 将钥匙起动开关和断路开关转到断开位置。
- 从配线线束上断开部件和 ECM。
- 在一个断开的线束连接上,将一根跨接导线连在可疑导线的触点与机架接地之间。
- 在其它机器线束接头上,使用万用表表笔测量可疑导线的触点与机架接地之间的电阻。
预期结果:电阻小于 5 欧姆。
正常 - 电阻小于 5 欧姆。 线束电路正常。
停止。
异常 - 电阻大于 5000 欧姆。 机器线束中存在断路。
修理:修理或更换机器线束。
停止。
Caterpillar Information System:
3034 Marine Engine Exhaust Manifold - Remove and Install
3126B Marine Engines System Overview
3034 Marine Engine Heat Exchanger - Install
3512B Marine Auxiliary Engine Analog Sensor - Calibrate
3456 Generator Sets Bearing - Lubricate
3512B Marine Auxiliary Engine Starting Motor System
3456 Generator Sets Generator Operation
3034 Marine Engine Heat Exchanger - Remove
3512B Marine Auxiliary Engine Secondary ECM/Personality Module
C-15 and C-16 Industrial Engines Engine Oil and Filter - Change
3034 Marine Engine Air Inlet Elbow - Remove and Install
37-MT, 41-MT, and 42-MT Series Starting Motors General Information
37-MT, 41-MT, and 42-MT Series Starting Motors Pinion Clearance - Adjust
3512B Marine Auxiliary Engine MID 047 - CID 0248 - FMI 09 CAT Data Link not communicating
G3304 and G3306 Engines Basic Engine
3512B Marine Auxiliary Engine MID 047 - CID 0342 - FMI 07 Secondary Speed Sensor misinstalled
G3600 Engines Engine Design
3126B Marine Engines Glossary
3034 Marine Engine - Installation Guide Fuel System
3512B Marine Auxiliary Engine MID 047 - CID 0190 - FMI 07 Primary Speed Sensor misinstalled
3034 Marine Engine Inlet Manifold - Remove
3500B and 3500 Marine Propulsion Engines with EUI Option Centrifugal Oil Filter - Inspect
3034 Marine Engine Engine Oil Cooler - Remove
3034 Marine Engine Engine Oil Cooler - Install