Air Inlet Elbow - Remove and Install
Removal Procedure
- Loosen hose clamp (1) from hose (2) .
Show/hide table
 | |
| Illustration 1 | g00809523 |
- Loosen hose clamp (5) from hose (4) and remove air inlet elbow (3) from the engine.
Installation Procedure
- Install air inlet elbow (3) onto the engine.
Show/hide table
| | |
| Illustration 2 | g00809523 |
- Tighten hose clamp (5) and hose clamp (2) .
Caterpillar Information System:
37-MT, 41-MT, and 42-MT Series Starting Motors General Information
3512B Marine Auxiliary Engine Engine Speed/Timing Sensor
3512B Marine Auxiliary Engine Engine Sensor Open/Short Test
3034 Marine Engine Turbocharger - Install
C15 Petroleum Generator Set Engines Electronic Unit Injector Mechanism
3406E Truck Engines Fuel System
3034 Marine Engine Turbocharger - Remove
735 Articulated Truck Power Train Transmission Mounting - TH35 Transmission to Engine
C32 Auxiliary Engine Sea Water Strainer - Clean/Inspect
3034 Marine Engine Fuel Conservation Practices
320B, 320B L and 320B N Excavators Travel in Water and Mud
G3500 Engines Engine Monitoring System
C-15 and C-16 Industrial Engines Engine Oil and Filter - Change
3512B Marine Auxiliary Engine Secondary ECM/Personality Module
3034 Marine Engine Heat Exchanger - Remove
3456 Generator Sets Generator Operation
3512B Marine Auxiliary Engine Starting Motor System
3456 Generator Sets Bearing - Lubricate
3512B Marine Auxiliary Engine Analog Sensor - Calibrate
3034 Marine Engine Heat Exchanger - Install
3126B Marine Engines System Overview
3034 Marine Engine Exhaust Manifold - Remove and Install
Product Link 151/201 Wiring Harness (Open Circuit) - Test
37-MT, 41-MT, and 42-MT Series Starting Motors Pinion Clearance - Adjust