Inlet Manifold - Remove - Type 2 Engines and 7BJ Engines
Removal Procedure
Note: For a complete description of Type 1 and Type 2 engines, refer to Disassembly and Assembly, "Engine Design".
Show/hide table
| NOTICE |
|---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
Show/hide table
| NOTICE |
|---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products. Dispose of all fluids according to local regulations and mandates. |
- Disconnect tube (1) from the air inlet heater.
Show/hide table
 | |
| Illustration 1 | g00557838 |
Typical example | |
- Loosen hose clamps (3) and slide the hose toward the turbocharger.
- Remove four bolts (2) and remove elbow (4) from the air inlet manifold.
- Remove bolts (5) that fasten air inlet manifold (6) to the engine.
Show/hide table
 | |
| Illustration 2 | g00558245 |
Typical example | |
- Remove air inlet manifold (6) .
Caterpillar Information System:
834G Wheel Tractor and 836G Landfill Compactor Braking System Gear Pump (Implement, Pilot, Brake)
988G Wheel Loader Power Train Final Drive and Wheel
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Electronic Systems F405 Fuel Level Sensor - Failed High
3116 Engine for Challenger 35, and Challenger 45 Agricultural Tractors and 3126 Engine for Challenger 55 Agricultural Tractor Engine Supplement Water Temperature Regulator - Remove and Install
CB-634C Vibratory Compactor Light Switches
797 Off-Highway Truck Power Train Modulating Valve (Transmission Clutch Engaging, Small)
D350E Series II Articulated Truck Power Train Relief Valve (Torque Converter Outlet) - Assemble
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Electronic Systems F404 Fuel Level Sensor - Failed Low
Electric Protection System Energize-To-Run For Generator Set, Industrial and Marine Diesel Engines Troubleshooting the ETR Partial Protection System (OP, WT)
Challenger 65C, Challenger 65D, Challenger 65E, Challenger 70C, Challenger 75C, Challenger 75D, Challenger 75E, Challenger 85C, Challenger 85D, Challenger 85E and Challenger 95E Agricultural Tractors Machine Monitor System Testing and Adjusting
3054 Engine for Caterpillar Built Machines Fuel Injection Nozzles - Install
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Electronic Systems F403 Aftercooler Temperature - Too High
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Machine Systems Brake Valve Assembly - Remove
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Electronic Systems F406 Coolant Temperature Sensor - Failed Low
Challenger 65C, Challenger 65D, Challenger 65E, Challenger 70C, Challenger 75C, Challenger 75D, Challenger 75E, Challenger 85C, Challenger 85D, Challenger 85E and Challenger 95E Agricultural Tractors Machine Monitor System Machine Monitor Faults
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Machine Systems Brake Valve Assembly - Install
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Machine Systems Brake Valve Assembly - Disassemble
CP-563D, CS-563D, CS-573D and CS-583D Vibratory Compactors Auxiliary Hydraulic System Gear Pump
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Machine Systems Brake Valve Assembly - Assemble
3054 Engine for Caterpillar Built Machines Inlet Manifold - Install - Type 2 Engines and 7BJ Engines
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Electronic Systems F407 Coolant Temperature Sensor - Failed High
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Electronic Systems F408 Engine Oil Pressure Sensor - Failed Low
3054 Engine for Caterpillar Built Machines Water Pump - Disassemble - Type 1 Engines and 9RM Engines
216, 226, 228, 232, 236, 242, 246, 248, 252 and 262 Skid Steer Loaders Hydraulic System Oil Level - Check