Electric Starting Motor - Remove and Install
Removal Procedure
Start By:
- Remove the seat. Refer to Disassembly and Assembly, RENR2848, "Seat - Remove and Install".
Note: Remove the negative lead from the battery before you work on the electric starting motor.
Show/hide table
Illustration 1 | g00542768 |
- Remove six bolts (1) and washers.
- Remove access panel (2) .
- Remove electrical wire (3) .
Show/hide table
Illustration 2 | g00542777 |
- Remove nut (4) .
Show/hide table
Illustration 3 | g00542818 |
- Remove two electrical wires (5) .
- Remove two bolts (6) and washers.
Show/hide table
Illustration 4 | g00544768 |
- Remove electric starting motor (7) through the access panel.
Installation Procedure
- Install electric starting motor (7) through the access panel.
Show/hide table
Illustration 5 | g00544768 |
- Install washers and two bolts (6) to the electric starting motor. Tighten the bolts.
- Install two electrical wires (5) .
Show/hide table
Illustration 6 | g00542818 |
- Install nut (4) .
- Install electrical wire (3) .
Show/hide table
Illustration 7 | g00542777 |
- Install access panel (2), washers, and six bolts (1). Tighten the bolts.
Show/hide table
Illustration 8 | g00542768 |
- Install the negative lead to the battery.
End By: Install the seat. Refer to Disassembly and AssemblyRENR2848, "Seat - Remove and Install".
Caterpillar Information System:
302.5 Mini Hydraulic Excavator Engine Supplement Bottom Guard - Remove and Install
302.5 Mini Hydraulic Excavator Engine Supplement Alternator - Remove and Install
3054 Engine for Caterpillar Built Machines Crankshaft Rear Seal - Install
301.5, 301.6 and 301.8 Mini Hydraulic Excavators Engine and Machine Warm-Up
3054 Engine for Caterpillar Built Machines Crankshaft Front Seal - Install
301.5, 301.6 and 301.8 Mini Hydraulic Excavators Engine Starting
3054 Engine for Caterpillar Built Machines Crankshaft Front Seal - Remove
3408E and 3412E Engines for Caterpillar Built Machines Unit Injector Hydraulic Pump
312B Excavator Machine Systems Travel Brake Valve - Assemble
312B Excavator Machine Systems Travel Brake Valve - Disassemble
P115, P120, P130 and P140 Mechanical Pulverizers Operation
312B Excavator Machine Systems Travel Brake Valve - Install
302.5 Mini Hydraulic Excavator Engine Supplement Fuel Filter and Water Separator - Remove and Install
307B Excavator Machine Systems Stick Cylinder - Disassemble
302.5 Mini Hydraulic Excavator Engine Supplement Water Pump - Remove and Install
302.5 Mini Hydraulic Excavator Engine Supplement Water Temperature Regulator - Remove and Install
302.5 Mini Hydraulic Excavator Engine Supplement Hydraulic Oil Cooler - Remove
302.5 Mini Hydraulic Excavator Engine Supplement Hydraulic Oil Cooler - Install
302.5 Mini Hydraulic Excavator Engine Supplement Muffler - Remove and Install
307B Excavator Supplement for 4M40 Engine Fuel Priming Pump - Remove and Install
302.5 Mini Hydraulic Excavator Engine Supplement Engine - Remove
302.5 Mini Hydraulic Excavator Engine Supplement Engine - Install
M318 and M320 Excavators Machine Electronic Control System Sensors
3054 Engine for Caterpillar Built Machines Flywheel Housing - Remove and Install