Travel Brake Valve - Disassemble
Disassembly Procedure
Start By:
- Remove the travel brake valve. Refer to Disassembly and Assembly, "Travel Brake Valve - Remove and Install" in this manual.
Note: Mark all of the components during the disassembly of the travel brake valve. Make sure that the marks are used during the assembly of the travel brake valve. Do not mix the parts.
- Thoroughly clean the outside of the travel brake valve prior to disassembly.
- Remove plate (1) from travel brake valve (2) .
Show/hide table
Illustration 1 | g00529095 |
- Remove O-ring seal (3) from travel brake valve (2). Remove brake valve (4) from the travel brake valve.
Show/hide table
Illustration 2 | g00529096 |
Show/hide table
Illustration 3 | g00532372 |
This is an exploded view of brake valve (4) . |
- Remove valve (5) from travel brake valve (2). Remove two check valves (6) from the travel brake valve. Remove brake valve (7) from the travel brake valve. Remove two relief valve (8) from the travel brake valve.
Show/hide table
Illustration 4 | g00532374 |
Show/hide table
Illustration 5 | g00532376 |
This is an exploded view of brake valve (7) . |
Caterpillar Information System:
P115, P120, P130 and P140 Mechanical Pulverizers Operation
312B Excavator Machine Systems Travel Brake Valve - Install
M318 and M320 Excavators Machine Electronic Control System Switches
312B Excavator Machine Systems Travel Brake Valve-Remove
3046 Engine For Caterpillar Built Machines Crankshaft Gear - Remove and Install
3046 Engine For Caterpillar Built Machines Gear Group (Front) - Install - Idler Gear Only
312B Excavator Machine Systems Final Drive - Install
3054 Engine for Caterpillar Built Machines Camshaft Gear - Remove and Install
312B Excavator Machine Systems Final Drive - Remove
M318 and M320 Excavators Machine Electronic Control System Engine and Hydraulic Pump Controller
3054 Engine for Caterpillar Built Machines V-Belts - Remove and Install
3304B and 3306B Engines for Caterpillar Built Machines Spacer Plate - Remove and Install
312B Excavator Machine Systems Travel Brake Valve - Assemble
3408E and 3412E Engines for Caterpillar Built Machines Unit Injector Hydraulic Pump
3054 Engine for Caterpillar Built Machines Crankshaft Front Seal - Remove
301.5, 301.6 and 301.8 Mini Hydraulic Excavators Engine Starting
3054 Engine for Caterpillar Built Machines Crankshaft Front Seal - Install
301.5, 301.6 and 301.8 Mini Hydraulic Excavators Engine and Machine Warm-Up
3054 Engine for Caterpillar Built Machines Crankshaft Rear Seal - Install
302.5 Mini Hydraulic Excavator Engine Supplement Alternator - Remove and Install
302.5 Mini Hydraulic Excavator Engine Supplement Bottom Guard - Remove and Install
302.5 Mini Hydraulic Excavator Engine Supplement Electric Starting Motor - Remove and Install
302.5 Mini Hydraulic Excavator Engine Supplement Fuel Filter and Water Separator - Remove and Install
307B Excavator Machine Systems Stick Cylinder - Disassemble