5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) Caterpillar

This service program code is used to set the time between each lubrication and the duration of each lubrication. The duration of lubrication for individual machines are listed here.

• The duration of lubrication for large wheel loaders is set for 60 seconds. The duration is not adjustable.

When this code is entered the display will first show:

Illustration 1	g00485800

Use the arrow keys to adjust the time of the lubrication intraval. This is the time in minutes between the automatic lubrication interval.

• The time interval for the wheel loaders is adjustable from 5 to 15 minutes. The factory default setting is 15 minutes.

After the proper time is set press the "OK" key.

Use the arrow keys to adjust the lubrication duration time. After the proper time is set press the "OK" key. The message center will now show:

Illustration 2	g00549540

Press the "OK" key again to exit LUBSET.

Large Wheel Loaders - The elapsed time (minutes) between each of the lubrication intervals is counted only when the engine speed is greater than 1000 rpm.

Lubrication will continue for the programmed duration, once the lubrication has begun.