Wheel Bearings and Duo-Cone Seals - Remove
Start By:
- Remove the axle shaft. Refer to Disassembly and Assembly, "Axle Shaft - Remove".
Show/hide table
NOTICE |
---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, PERJ1017, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products. Dispose of all fluids according to local regulations and mandates. |
- Place a suitable container below wheel (1) in order to contain oil for storage or disposal.
- Use two people to remove hub (2) from wheel (1). The weight of hub (2) is
34 kg (75 lb) .Show/hide tableIllustration 2 g00580899 - Put identification on roller bearing cone (3) for installation purposes. Remove roller bearing cone (3) from wheel (1).
Show/hide table
Illustration 3 g00580903 - Position two lifting slings on wheel (1), as shown. Secure the lifting slings to a suitable hoist. Remove wheel (1) from the axle housing. The weight of wheel (1) is
320 kg (700 lb) .Show/hide tableIllustration 4 g00581123 - Put identification on roller bearing cone (5) for installation purposes. Remove roller bearing cone (5) from the axle housing.
- Remove seal retainer (4) from the axle housing.
Show/hide table
Illustration 5 g00581157 - Remove toric ring (6) from seal retainer (4). Remove O-ring seal (7) from seal retainer (4).
Show/hide table
Illustration 6 g00486587 - Remove Duo-Cone seal (8) and the toric ring.
Show/hide table
Illustration 7 g00486589 - Remove two roller bearing cups (9) from the wheel.
Show/hide table
Illustration 8 g00581160 - Remove Duo-Cone seal (11) and the toric ring from the axle housing. Remove Duo-Cone seal (10) and the toric rings from the rear service and parking brake.
Show/hide table
Illustration 1 | g00580894 |
Caterpillar Information System:
69D and 769D Off-Highway Truck and 771D Quarry Truck Power Train Wheel Bearings and Duo-Cone Seals - Install
69D and 769D Off-Highway Truck and 771D Quarry Truck Power Train Tire and Rim (Rear) - Remove
69D and 769D Off-Highway Truck and 771D Quarry Truck Power Train Tire and Rim (Rear) - Install
69D and 769D Off-Highway Truck and 771D Quarry Truck Power Train Spindle - Remove
69D and 769D Off-Highway Truck and 771D Quarry Truck Power Train Spindle - Install
789B Off-Highway Truck Power Train Torque Converter and Transmission Pressure Chart
69D and 769D Off-Highway Truck and 771D Quarry Truck Power Train Final Drive - Remove
69D and 769D Off-Highway Truck and 771D Quarry Truck Power Train Final Drive - Install
69D and 769D Off-Highway Truck and 771D Quarry Truck Power Train Final Drive - Disassemble
69D and 769D Off-Highway Truck and 771D Quarry Truck Power Train Final Drive - Assemble
789B Off-Highway Truck Power Train Final Drive
D250E Series II, D300E Series II, D350E Series II and D400E Series II Articulated Trucks Power Train Electronic Control System CID 0969 FMI 06 Solenoid Valve (Front Differential Lock) Current Above Normal - Test
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders Belts - Inspect/Adjust/Replace
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) Lubrication Interval - Set
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) Lubrication Manual - Start
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) Event Acknowledged - Show
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) Event Statistics - Show
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) Event List - Show
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) Event - Configure
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) Event Recorder - Start
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) Data Logger - Start/Stop
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) Data Logger - Reset
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) Display Units - Set
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) Display Language - Set