Seat - Remove and Install
Removal Procedure
- Remove bolts (1) from the seat.
Show/hide table
 | |
| Illustration 1 | g00922849 |
- Cut cable straps (2) .
Show/hide table
 | |
| Illustration 2 | g00922850 |
- Remove handles (3), (4), and (5) .
- Remove retainer (8) and move cable (7) aside.
Show/hide table
 | |
| Illustration 3 | g00922851 |
- Remove bolt (6) .
- Remove retainer (11) and move cable (10) aside.
Show/hide table
 | |
| Illustration 4 | g00922852 |
- Remove bolt (9) .
- Raise the rear of seat (12) in order to move under suspension (13). Remove seat (12) .
Show/hide table
 | |
| Illustration 5 | g00922853 |
Installation Procedure
- Install seat (12). Raise the rear of seat (12) in order to move under suspension (13) .
Show/hide table
| | |
| Illustration 6 | g00922853 |
- Install bolt (9) .
Show/hide table
| | |
| Illustration 7 | g00922852 |
- Move cable (10) into the proper position. Install retainer (11) .
- Install bolt (6) .
Show/hide table
| | |
| Illustration 8 | g00922851 |
- Move cable (7) into the proper position. Install retainer (8) .
- Install handles (3), (4), and (5) .
Show/hide table
| | |
| Illustration 9 | g00922850 |
- Attach cable straps (2) .
- Install bolts (1) to the seat.
Show/hide table
| | |
| Illustration 10 | g00922849 |
Caterpillar Information System:
3500 and 3500B High Displacement Engines for Caterpillar Built Machines Electronic Control Module (ECM) and Personality Module (PM) - Remove and Install
Installation Instructions for the Machine Security System on the Small Wheel Loaders{7631} Installation Instructions for the Machine Security System on the Small Wheel Loaders{7631}
TK711, TK721, TK722 and TK732 Track Feller Bunchers Hydraulic System Felling Head System
TK711, TK721, TK722 and TK732 Track Feller Bunchers Hydraulic System Piston Pump (Saw)
TK711, TK721, TK722 and TK732 Track Feller Bunchers Hydraulic System Travel System
R1600G Load Haul Dump Power Train Differential Pinion Preload Adjustment
R1600G Load Haul Dump Power Train Differential
R1600G Load Haul Dump Power Train Bevel Gear and Pinion (Fixed and Oscillating Axles)
R1600G Load Haul Dump Power Train Pressure Switch (Axle Oil)
R1600G Load Haul Dump Power Train Temperature Switch (Axle Oil)
R1600G Load Haul Dump Power Train Drive Shaft
R1600G Load Haul Dump Power Train Temperature Sensor (Torque Converter Oil)
533 and 543 Wheel Feller Bunchers Power Train Drive Shaft (Front) - Remove and Install
C11 and C13 Engines Cylinder Head
533 and 543 Wheel Feller Bunchers Power Train Tire and Rim (Front) - Remove and Install
533 and 543 Wheel Feller Bunchers Power Train Tire and Rim (Rear) - Remove and Install
533 and 543 Wheel Feller Bunchers Machine Systems Hand Pump (Hydraulic Oil Fill) - Remove and Install
TK711, TK721, TK722 and TK732 Track Feller Bunchers Engine Oil and Filter - Change
TH210 and TH215 Telehandlers Power Train Hydrostatic Drive Motor - Install
AP655D and BG655D Asphalt Pavers Propel System Piston Motor (Propel) (Mobil-Trac)
AP-655C and BG-2255C Asphalt Pavers Propel System Final Drive Planetary
AP-655C and BG-2255C Asphalt Pavers Propel System Hydraulic Cylinder (Track Tension)
AP-655C and BG-2255C Asphalt Pavers Propel System Accumulator (Track Tension)
14H Motor Grader Power Train Drive Sprocket - Remove and Install