 | |
| Illustration 1 | g00927013 |
Final Drive Planetary
Type ... Planetary gear reducer (two speed) with integral braking system
High gear ratio ... 33.66:1
Low gear ratio ... 119.51:1
Minimum shift pressure ... 2000 kPa (290 psi)
Maximum shift pressure ... 10500 kPa (1510 psi)
Full brake release pressure ... 3000 kPa (435 psi)
Maximum brake pressure ... 20000 kPa (2900 psi)
Continuous torque rating ... 17000 N·m (12540 lb ft)
Maximum input speed ... 3800 rpm
 | |
| Illustration 2 | g00927047 |
(1) Tighten 40 bolts to the following torque. ... 440 ± 57 N·m (325 ± 42 lb ft)
(2) Tighten 32 bolts to the following torque. ... 530 ± 70 N·m (390 ± 52 lb ft)
(3) Use the following pattern in order to torque 32 nuts.
- Torque for first pass ... 450 N·m (332 lb ft)
- Torque for second pass ... 560 ± 60 N·m (413 ± 44 lb ft)
- Torque for static inspection (minimum six bolts) ... 476 N·m (351 lb ft)
- Torque for second pass ... 560 ± 60 N·m (413 ± 44 lb ft)
 | |
| Illustration 3 | g00927019 |
Note: Note the position of the ports relative to detents (6) .
(4) Fitting ... Planetary brake port
(5) Fitting ... Port for planetary shift
Position fitting (4) to 70 degrees in relation to detent (6) .
Position fitting (5) to 40 degrees in relation to detent (6).